I'd have to say the grounding arrangement would vary from console to console depending on what was ordered. You'll have to check. It should be visually obvious from the back side unless it's a PCB bay. Whether or not it's actually bussed might not be apparent with a continuity check.
On Sat, May 23, 2009 at 1:30 AM, jarrod dandrea <[email protected]> wrote: > > Hello, > Does anyone know if the built in patchbays on the SII have bussed > grounds? I am thinking of putting some extra outboard pres on the patchbay > and wanted to check before I start planning. I believe I could just plug in > a patch cable and check the continuity between the ground on the punch down > block and the ground on the cable. I won't be near my board for a few days > and am just curious before I make more plans. > > thanks, > > Jarrod > > > > > > > ------ > > View the list online at: http://www.mail-archive.com/[email protected] > > You can unsubscribe at anytime by sending an email to mailto: > [email protected] with "unsubscribe neotek" in the message body. If > you have any difficulties, or questions --please send an email to mailto: > [email protected]. > > The Neotek list is lovingly hosted by Catapult Web. Remember that any > message or reply sent to the list will be automatically forwarded to all > subscribers. > > Vive Le Neotek! > > Thanks. >
