There is also a "HV' 317 variant rated for a 60V in/out differential:

http://www.national.com/ds/LM/LM317HV.pdf

Bri


---- Ike Zimbel <[email protected]> wrote: 
> I think what Matt was talking about was a TL-783 
> http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=296-20687-5-ND.
> best,
> Ike
> 
> eliya gwetta wrote:
> > Hi Matt,
> >
> > Yes! I remembered the LM317 not being the right regulator for 48V, a 
> > TL583 would be a drop in replacement or I would have to change other 
> > components in the circuit as well?
> >
> > On Sat, Jul 4, 2009 at 9:25 PM, Matt Syson 
> > <[email protected] <mailto:[email protected]>> 
> > wrote:
> >
> >     Hi
> >     The JLM circuits are pretty much what you need so you could either
> >     'copy' the circuit and build it yourself or buy the kit.
> >     I am not too impressed at using a LM317 for the phantom 48 rail,
> >     they are only rated to 39 or 40 volt DIFFERENTIAL (input pin to
> >     output pin) , meaning that if you short the output you stand a
> >     good chance of 'blowing it up'. I presume the 47 Ohm resistor is a
> >     lame way of trying not to 'kill' it, hardly a good engineering
> >     solution.
> >     You should substitute it for a TL583 (sorry this number won't come
> >     to me, but there is a similarly packaged regulator that handles
> >     125 Volts).
> >     Matt S
> >
> >
> >     Donald Put wrote:
> >
> >         If you're up to making your own, there are numerous PCBs/kits
> >         available for this type of project.  They're set up for dual
> >         voltages and 48VDC for the phantom power.  Check out JLM's
> >         offerings on his website:
> >
> >         http://www.jlmaudio.com/JLM%20Power%20Supply.htm
> >
> >         Cheers,
> >         --
> >         Don
> >
> >     ------
> >
> >     View the list online at:
> >     http://www.mail-archive.com/[email protected]
> >
> >     You can unsubscribe at anytime by sending an email to
> >     mailto:[email protected] <mailto:[email protected]>
> >     with "unsubscribe neotek" in the message body. If you have any
> >     difficulties, or questions --please send an email to
> >     mailto:[email protected] <mailto:[email protected]>.
> >
> >     The Neotek list is lovingly hosted by Catapult Web. Remember that
> >     any message or reply sent to the list will be automatically
> >     forwarded to all subscribers.
> >
> >     Vive Le Neotek!
> >
> >     Thanks.
> >
> >
> 
> -- 
> Ike Zimbel
> Zimbel Audio Productions Ltd.
> Toronto
> 416-720-0887
> "Studio House Calls" - Repairs and upgrades to analog audio equipment 
> including: Amek, Allen & Heath, Neve, Neotek, MCI, Soundcraft and more.
> 
> 
> ------
> 
> View the list online at: http://www.mail-archive.com/[email protected]
> 
> You can unsubscribe at anytime by sending an email to 
> mailto:[email protected] with "unsubscribe neotek" in the message body. 
> If you have any difficulties, or questions --please send an email to 
> mailto:[email protected].
> 
> The Neotek list is lovingly hosted by Catapult Web. Remember that any message 
> or reply sent to the list will be automatically forwarded to all subscribers.
> 
> Vive Le Neotek!
> 
> Thanks.

------

View the list online at: http://www.mail-archive.com/[email protected]

You can unsubscribe at anytime by sending an email to 
mailto:[email protected] with "unsubscribe neotek" in the message body. 
If you have any difficulties, or questions --please send an email to 
mailto:[email protected].

The Neotek list is lovingly hosted by Catapult Web. Remember that any message 
or reply sent to the list will be automatically forwarded to all subscribers.

Vive Le Neotek!

Thanks.

Reply via email to