Hey- I am sorry to respond to a thread, but I am not sure if my posts were going out to the group. My question was, does anyone understand why my LED VU meters are not lighting up. They were and suddenly stopped. Does it have to do with the foldback configuration? Thanks, Colby
-----Original Message----- From: Ike Zimbel <[email protected]> To: [email protected] Sent: Mon, Jan 4, 2010 9:59 am Subject: Re: NEOTEK: Neotek Espirit I second that motion. This is a real concern with consoles that have motherboards (like the Series-II) and most other consoles because of the inevitable flexing of the frame when the desk is moved (not to mention that with say, an SSL or a Neve V series, the modules add hundreds of pounds to the frame). With an Elite, Elan, Espirit, Etc. the concern is more with breaking knobs off and so on as you go through doors, since the modules are connected with flexible ribbon cables. Good luck, Ike Frank Moscowitz wrote: > I'd recommend against transporting the frame loaded with modules if > you can > avoid it. This is less important the lighter and smaller it > is, but safer > so long as you protect the modules well in transit. > > On Sun, Jan 3, 2010 at 11:36 PM, Josh Fry <[email protected] > > <mailto:[email protected]>> wrote: > > Hello, > > I have recently acquired a Neotek Espirit console rather cheaply > and at the moment it is in storage until I have somewhere to > install it properly. When I picked it up, all the channel strips, > master strips and bantams had been pulled out for transportation > and I'm just starting to put it all back together again to test > and wire the outputs. My question is: Is it wise/safe to transport > the console fully loaded or should I leave the frame empty until > the desk is in final installed position? > Also, does anyone know of any gotchyas when putting these things > back together? So far it's been reasonably straight forward. > > Thanks, > > Josh > > -- Ike Zimbel Zimbel Audio Productions Ltd. Toronto 416-720-0887 "Studio House Calls" - Repairs and upgrades to analog audio equipment including: AMEK, Allen & Heath, Neve, Neotek, MCI, Soundcraft and more. www.zimbelaudio.com ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
