Greetings to all! I picked up a 1993 Elite. I've made the jump from a Mackie. I've never had a board like this and I'm needing some help with the power supply connections. Sorry for the freshman question, but I'm trying to get this thing up and running without any help. The 12 terminals on the rear of the supply are connected to the power supply cable, but there are only 8 terminals on the board. I'm not sure which wires connect to which terminals. There are lables on the terminals of both the supply and the board, but they are not all the same. How can I determine which connections to make? Here are the 12 terminals on the rear of the supply, and the 8 terminals on the board:
Supply: 1. -18V 2. -18V 3. Bipolar Ground 4. Bipolar Ground 5. +18V 6. +18V 7. +48V 8. Phantom Ground 9. +35V 10. Meter Ground 11. -25V 12. Logic Ground Board: 1. - analog power 2. + analog power 3. Analog Phantom Ground 4. Phantom Power 5. Logic Ground 6. Logic Power 7. Meter Ground 8. Meter Power ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
