The master section will function with just the 2-mix and monitor modules fitted, so you could try that and see if the fault is on either the Aux master or FX return modules.
Ike Zimbel, Zimbel Audio Ltd 416-720-0887 www.zimbelaudio.com Sent from my iPhone On 2012-01-09, at 5:27 PM, Jim <[email protected]> wrote: > Hi David, > > I copied this to the list so everyone else can see what's going on. > > Well, it may or may not. Still could be either one so: > > What I'd do first is to pull all the modules out of the console. Connect the > supply and see if it comes up. Then insert each module one at a time to find > the problem. ******You must power down before inserting the modules, > particularly with the logic stuff; I would 100% power down for each module > though. This can take a little while, but is the fastest approach to find > what is pulling down the supply. > > The other possibility is the supply does have problems and can't supply > current under load. Do you have any types of meters (volts, amps, ohms) a > large resistive dummy load or the ability to make one? I can give you tips, > but if it's not something that your comfortable with or have the gear, it > really won't be of much help. If that's the case, you may want to take Ike up > on the offer to try his supply; if it works, then you just need to have yours > fixed; at least this will break the problem down into which "half" is the > issue. > > Good luck! > > Regards, Jim > > > On 1/9/2012 12:59 PM, [email protected] wrote: >> Jim, >> I just turned on the supply (disconnected of course) and all >> lights came on. Would this point to the modules? >> >> Dave >> >> ---- Original Message ---- >> From: [email protected] >> To: [email protected] >> Subject: Neotek console help >> Date: Mon, 09 Jan 2012 12:18:49 -0500 >> >>> Hi David, >>> >>> Well yes, we (Analog Bros) fix modules, supplies, consoles, etc. >>> BUT, >>> we're in the process of moving into a new shop and house that I'm >>> building myself. My entire shop/lab/parts/etc. are in storage and I >>> don't see it being set back up till spring at the earliest. >>> >>> I still think your problem is in the supply rather than any modules; >>> I'd >>> be glad to help you figure that out using the Neotek list so everyone >>> >>> else can benefit. If it does turn out you have some bad modules, I >>> may >>> be able to suggest another shop to use till we get set back up. >>> Thanks >>> and good luck! >>> >>> Regards, Jim >>> www.analogbros.com >>> >>> >> >> >> > ------ > > View the list online at: http://www.mail-archive.com/[email protected] > > You can unsubscribe at anytime by sending an email to > mailto:[email protected] with "unsubscribe neotek" in the message body. > If you have any difficulties, or questions --please send an email to > mailto:[email protected]. > > The Neotek list is lovingly hosted by Catapult Web. Remember that any message > or reply sent to the list will be automatically forwarded to all subscribers. > > Vive Le Neotek! > > Thanks. > ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
