good call! I reinstalled the src rpm, exported STRIP and it built with no errors! sounds like a release note is called for. 9-) -mark
Dave Shield wrote: > On 11/04/2008, Mark Seger <[EMAIL PROTECTED]> wrote: > >> oops, I had been using the hacked version so I just finished rerunning it >> after exporting STRIP=true and it failed at the man page section. >> > > Firstly, I would suggest that you start again with a completely > clean installation of the source RPM. Remove the old spec file, > and all the sources. Then install the source RPM, export > STRIP=true, and rebuild. > > If it still fails, please post the configure incantation that > is issued early on in the rpmbuild process. > (You may find it useful to run > rpmbuild .... 2>&1 | tee net-snmp-build.log > to catch the output of the build) > > Dave > ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
