SNMPGET is returning value for the query with the "Authentication Error" message. All single-request commands do show the same behavior. Due to mail box size constraint I couldn't send the "usr" folder contents.
/*****log for reference*****/ D:\NET_SNMP_OPEN_XTRA\NET-SNMP>snmpget -v 3 -l AuthNoPriv -u TestAuthMD5NoPriv -a MD5 -A 1234567891234567 172.26.26.181 SNMPv 2-MIB::sysContact.0 Authentication failed for TestAuthMD5NoPriv SNMPv2-MIB::sysContact.0 = STRING: Nissan I would like to know the commands to configure the authentication and the privacy protocol setup in net-snmp. Thanks Priya -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave Shield Sent: Wednesday, April 16, 2008 7:21 PM To: Lakshmipriya Subramanian (CW) Cc: [email protected] Subject: Re: SNMP V3 walk failed in Net-SNMP On 16/04/2008, Lakshmipriya Subramanian (CW) <[EMAIL PROTECTED]> wrote: > I have attached the "usr" folder that I am using to test the SNMP > commands. Errr.... no, you haven't! In general, I would suggest that you test with single-request commands (snmpget/snmpgetnext) rather than snmpwalk. Dave ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
