On Fri, May 14, 2010 at 11:09 AM, Duy Doan Khuong <[email protected]> wrote: > I’m using Net-snmp 5.5. When I install snmpd service mode (Net-SNMP Agent service), run netsnmpwalk: > C:\>netsnmpwalk -v 2c -c public 192.168.98.193 1.3.6.1.2.1.4.20.1.1 > IP-MIB::ipAdEntAddr.0.0.0.0 = IpAddress: 84.73.84.89 > IP-MIB::ipAdEntAddr.10.11.12.193 = IpAddress: 10.11.12.193 > IP-MIB::ipAdEntAddr.127.0.0.1 = IpAddress: 127.11.12.193 > IP-MIB::ipAdEntAddr.192.168.98.193 = IpAddress: 192.168.98.193 > > It show wrong IP (84.73.84.89), it must be 0.0.0.0 > > I stop net-snmp service, and run snmpd by command line: > c:\usr\bin>snmpd.exe –a > > and run netsnmpwalk: > C:\>netsnmpwalk -v 2c -c public 192.168.98.193 1.3.6.1.2.1.4.20.1.1 > IP-MIB::ipAdEntAddr.0.0.0.0 = IpAddress: 0.0.0.0 > IP-MIB::ipAdEntAddr.10.11.12.193 = IpAddress: 10.11.12.193 > IP-MIB::ipAdEntAddr.127.0.0.1 = IpAddress: 127.0.0.1 > IP-MIB::ipAdEntAddr.192.168.98.193 = IpAddress: 192.168.98.193 > > Now it shows correct IP address. > > How can I make the net-snmp service show correct IP address (0.0.0.0) ?
This depends on how the Net-SNMP agent service has been installed. Have you installed Net-SNMP with or without winExtDLL support ? And what is specified on the third line of C:\usr\registeragent.bat on your system (the line that sets the variable additionaloptions) ? Bart.
------------------------------------------------------------------------------
_______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
