Hello Duy, Thanks for the feedback. On which Windows version have you observed this behavior ?
Bart. On Fri, May 14, 2010 at 12:47 PM, Duy Doan Khuong <[email protected]> wrote: > Hi Bart, > > > > I modify as your guide, and now Net-SNMP service works as expected. Thank > you. > > > > > > I have removed ip entry from additionaloptions, and run > unregisteragent.bat, run registeragent.bat, started Net_SNMP, it also works > as expected. > > I have stopped Net-SNMP agent, and started build in SNMP service of > Microsofts, the result also is as expected. > > > > I think there is some thing wrong with the way we load ip mib while > starting snmpd. > > > > Thanks, > > Duy > > > > > ------------------------------ > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *Bart Van Assche > *Sent:* Friday, May 14, 2010 5:37 PM > > *To:* Duy Doan Khuong > *Cc:* [email protected] > *Subject:* Re: different between Net-SNMP Agent service and snmpd.exe from > command line > > > > Hello Duy, > > This means that you have found a bug in one of Microsofts SNMP extension > DLLs. You can switch from the Microsoft implementation of IP-MIB to the > Net-SNMP implementation by modifying the third line of registeragent.bat as > follows: > > set additionaloptions= -Lf "C:/usr/log/snmpd.log" -I-winExtDLL > > and next to stop the Net-SNMP service, run unregisteragent.bat, run > registeragent.bat and to start the Net-SNMP service again. > > Bart. > > On Fri, May 14, 2010 at 12:17 PM, Duy Doan Khuong <[email protected]> > wrote: > > Hi Bart, > > > > I have installed Net-SNMP service with winExtDll support. > > The third line of C:\usr\registeragent.bat on my system: > > > > set additionaloptions= -Lf "C:/usr/log/snmpd.log" > -I-udp,udpTable,tcp,tcpTable,icmp,ip,interfaces,system_mib,sysORTable > > > > > > > > Duy > ------------------------------ > > *From:* [email protected] [mailto:[email protected]] *On > Behalf Of *Bart Van Assche > *Sent:* Friday, May 14, 2010 4:51 PM > *To:* Duy Doan Khuong > *Cc:* [email protected] > *Subject:* Re: different between Net-SNMP Agent service and snmpd.exe from > command line > > > > On Fri, May 14, 2010 at 11:09 AM, Duy Doan Khuong <[email protected]> > wrote: > > I’m using Net-snmp 5.5. When I install snmpd service mode (Net-SNMP Agent > service), run netsnmpwalk: > > C:\>netsnmpwalk -v 2c -c public 192.168.98.193 1.3.6.1.2.1.4.20.1.1 > > IP-MIB::ipAdEntAddr.0.0.0.0 = IpAddress: 84.73.84.89 > > IP-MIB::ipAdEntAddr.10.11.12.193 = IpAddress: 10.11.12.193 > > IP-MIB::ipAdEntAddr.127.0.0.1 = IpAddress: 127.11.12.193 > > IP-MIB::ipAdEntAddr.192.168.98.193 = IpAddress: 192.168.98.193 > > > > It show wrong IP (84.73.84.89), it must be 0.0.0.0 > > > > I stop net-snmp service, and run snmpd by command line: > > c:\usr\bin>snmpd.exe –a > > > > and run netsnmpwalk: > > C:\>netsnmpwalk -v 2c -c public 192.168.98.193 1.3.6.1.2.1.4.20.1.1 > > IP-MIB::ipAdEntAddr.0.0.0.0 = IpAddress: 0.0.0.0 > > IP-MIB::ipAdEntAddr.10.11.12.193 = IpAddress: 10.11.12.193 > > IP-MIB::ipAdEntAddr.127.0.0.1 = IpAddress: 127.0.0.1 > > IP-MIB::ipAdEntAddr.192.168.98.193 = IpAddress: 192.168.98.193 > > > > Now it shows correct IP address. > > > > How can I make the net-snmp service show correct IP address (0.0.0.0) ? > > This depends on how the Net-SNMP agent service has been installed. Have you > installed Net-SNMP with or without winExtDLL support ? And what is specified > on the third line of C:\usr\registeragent.bat on your system (the line that > sets the variable additionaloptions) ? > > Bart. > > >
------------------------------------------------------------------------------
_______________________________________________ Net-snmp-coders mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
