Hi,
I am trying to work with net-snmp on ipv6. I have done all the required steps
to make it work but somehow it is still not working.
Here are the steps which I did:
1. Configured with ipv6 options:
--with-mib-modules="mibII/ipv6 host notification snmpv3mibs" \
--with-libwrap \
--sysconfdir=${_sysconfdir} \
--enable-ipv6 \
--enable-ucd-snmp-compatibility \
--with-openssl \
--with-pic \
--with-transports="UDPIPv6 TCPIPv6" \
--with-out-mib-modules="ucd_snmp disman/event disman/schedule" \
2. Now when I run with
#snmpd udp6:161 -L -f -d -Dall
I get following errors:
2011-03-04 14:19:46 trace: init_master_agent(): snmp_agent.c, 1242:
2011-03-04 14:19:46 snmp_agent: init_master_agent; "udp:161" registered as an
agent NSAP
2011-03-04 14:19:46 trace: init_master_agent(): snmp_agent.c, 1218:
2011-03-04 14:19:46 snmp_agent: installing master agent on port udp6:161
2011-03-04 14:19:46 trace: netsnmp_tdomain_transport_full(): snmp_transport.c,
349:
2011-03-04 14:19:46 tdomain: tdomain_transport_full("snmp", " udp6:161", 1,
"[NIL]", "[NIL]")
2011-03-04 14:19:46 trace: find_tdomain(): snmp_transport.c, 326:
2011-03-04 14:19:46 tdomain: Found no domain from specifier " udp6"
2011-03-04 14:19:46 trace: netsnmp_lookup_default_domains(): snmp_service.c,
200:
2011-03-04 14:19:46 defaults: netsnmp_lookup_default_domain("snmp") -> "udp"
"udp6"
2011-03-04 14:19:46 trace: netsnmp_tdomain_transport_full(): snmp_transport.c,
392:
2011-03-04 14:19:46 tdomain: Use application default domains "udp" "udp6"
2011-03-04 14:19:46 trace: find_tdomain(): snmp_transport.c, 322:
2011-03-04 14:19:46 tdomain: Found domain "udp" from specifier "udp"
2011-03-04 14:19:46 trace: netsnmp_lookup_default_target(): snmp_service.c, 388:
2011-03-04 14:19:46 defaults: netsnmp_lookup_default_target("snmp", "udp") ->
":161"
2011-03-04 14:19:46 trace: netsnmp_tdomain_transport_full(): snmp_transport.c,
421:
2011-03-04 14:19:46 tdomain: trying domain "udp" address " udp6:161" default
address ":161"
2011-03-04 14:19:46 trace: netsnmp_sockaddr_in2(): snmpUDPDomain.c, 795:
2011-03-04 14:19:46 netsnmp_sockaddr_in: addr 0x7fff28e1ece0, inpeername "
udp6:161", default_target ":161"
2011-03-04 14:19:46 trace: netsnmp_sockaddr_in2(): snmpUDPDomain.c, 850:
2011-03-04 14:19:46 netsnmp_sockaddr_in: check user service 161
2011-03-04 14:19:46 trace: netsnmp_sockaddr_in2(): snmpUDPDomain.c, 879:
2011-03-04 14:19:46 netsnmp_sockaddr_in: check destination udp6
2011-03-04 14:19:46 getaddrinfo: udp6 Name or service not known
2011-03-04 14:19:46 trace: find_tdomain(): snmp_transport.c, 322:
2011-03-04 14:19:46 tdomain: Found domain "udp6" from specifier "udp6"
2011-03-04 14:19:46 trace: netsnmp_lookup_default_target(): snmp_service.c, 388:
2011-03-04 14:19:46 defaults: netsnmp_lookup_default_target("snmp", "udp6") ->
":161"
2011-03-04 14:19:46 trace: netsnmp_tdomain_transport_full(): snmp_transport.c,
421:
2011-03-04 14:19:46 tdomain: trying domain "udp6" address " udp6:161" default
address ":161"
2011-03-04 14:19:46 trace: netsnmp_sockaddr_in6_2(): snmpUDPIPv6Domain.c, 371:
2011-03-04 14:19:46 netsnmp_sockaddr_in6: addr 0x7fff28e1ecd0, peername "
udp6:161", default_target ":161"
2011-03-04 14:19:46 trace: netsnmp_sockaddr_in6_2(): snmpUDPIPv6Domain.c, 523:
2011-03-04 14:19:46 netsnmp_sockaddr_in6: hostname(?) with port suffix :161
2011-03-04 14:19:46 getaddrinfo(" udp6", NULL, ...): Name or service not known
2011-03-04 14:19:46 Error opening specified endpoint " udp6:161"
2011-03-04 14:19:46 Server Exiting with code 1
I am not sure what ealse should I do. I am running ipv6 on my system.
# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:15:17:66:18:EC
inet addr:192.168.10.67 Bcast:192.168.11.255 Mask:255.255.252.0
inet6 addr: fe80::215:17ff:fe66:18ec/64 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:7769365 errors:0 dropped:2504 overruns:0 frame:0
TX packets:1361859 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1385684289 (1.2 GiB) TX bytes:225882775 (215.4 MiB)
eth1 Link encap:Ethernet HWaddr 00:15:17:66:18:ED
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ifb0 Link encap:Ethernet HWaddr FE:98:EE:DC:F6:54
BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ifb1 Link encap:Ethernet HWaddr 1E:81:BF:47:E6:44
BROADCAST NOARP MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:32
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2323714 errors:0 dropped:0 overruns:0 frame:0
TX packets:2323714 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2045350865 (1.9 GiB) TX bytes:2045350865 (1.9 GiB)
Regards
-tarun
------------------------------------------------------------------------------
What You Don't Know About Data Connectivity CAN Hurt You
This paper provides an overview of data connectivity, details
its effect on application quality, and explores various alternative
solutions. http://p.sf.net/sfu/progress-d2d
_______________________________________________
Net-snmp-coders mailing list
Net-snmp-coders@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
