Hello,
Is your device configured to handle SetRequest?
- sandvige
---------------------------------------------
Hello sandvige,
Its prompting as Response Time Out but am also able to see the TCP Dump
packet generated as below.
> 10.213.85.246.snmp: C=smartsrw SetRequest(138) E:2011.6.10.1.2.4.1.2.107=3
> E:2011.6.10.1.2.4.1.3.107=2 E:2011.6.10.1.2.4.1.4.107="testfile.cfg"
> E:2011.6.10.1.2.4.1.5.107=10.80.159.101 E:2011.6.10.1.2.4.1.9.107=4
0x0000: 4500 00b9 0000 4000 4011 2fb4 0a50 9f65
0x0010: 0ad5 55f6 9a07 00a1 00a5 0b37 3081 9a02
0x0020: 0101 0408 736d 6172 7473 7277 a381 8a02
0x0030: 0455 3e08 bc02 0100 0201 0030 7c30 1406
0x0040: 0f2b 0601 0401 8f5b 060a 0102 0401 026b
0x0050: 0201 0330 1406 0f2b 0601 0401 8f5b 060a
0x0060: 0102 0401 036b 0201 0230 1f06 0f2b 0601
0x0070: 0401 8f5b 060a 0102 0401 046b 040c 7465
0x0080: 7374 6669 6c65 2e63 6667 3017 060f 2b06
0x0090: 0104 018f 5b06 0a01 0204 0105 6b40 040a
0x00a0: 509f 6530 1406 0f2b 0601 0401 8f5b 060a
0x00b0: 0102 0401 096b 0201 04
Best Regards,
Keshav Lute
-----Original Message-----
From: Edouard COLE [mailto:[email protected]]
Sent: Wednesday, November 28, 2012 3:53 PM
To: Lute,K,Keshav,DMR C; [email protected]
Subject: RE: Unable to perform SNMPSET operation
Hi,
What's the prompted error?
- sandvige
---------------------------------------------
HI Team,
I have installed " net-snmp tool Version: 5.6.1" on my linux
box and found that SNMPSET is not working properly.
I am able to get device details through snmpget but not through snmpset.
Getting an timeout response.
What can be the cause here.
Best Regards,
Keshav Lute
------------------------------------------------------------------------------
Keep yourself connected to Go Parallel:
VERIFY Test and improve your parallel project with help from experts
and peers. http://goparallel.sourceforge.net
_______________________________________________
Net-snmp-coders mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/net-snmp-coders
