[ plz dont email me, keep all on the malinglist so other can learn/help too ]
As far as i know UCD-DISKIO-MIB is the only MIB that implement disk access read/write infos ,( perhaps someone else can help. So perhaps the best is like Robert told u, check if the net-snmp on SLSE 9 gets compiled with dlmod and compile the UCD-DISKIO-MIB or any other MIB implementation that support diskIO, so u could survice any patch by Suse. There is a OID that show the compile options of net-snmp, but i couldnt find it, i though its was under UCD too. Your last change would be a passthough or if compile with embedded perl , a script that monitor the diskIO, something like this http://lists.netmrg.net/post-322.htm or http://www.rrdbrowse.org/manual/#pod2docbook-ch-1-sect-3-f. Baumgart Thanks Alexander, I a bit new with Net-SNMP here... If UCD-DISKIO-MIB is obsolete, what it the OID that will give me the disk access (read and write)? We are using MRTG to plot the value and see what are the stress on the server. For the compilation, all the other SLSE 8 where compile with it and yes it is easy. But for SLSE 9, SuSE will eventually send a patch for Net-SNMP and will destroy any custom compile (I guest). For the MIBS=ALL, I not certain to understand it. I want the server to report value on disk access using MRTG as mention above. I don't want the server to do smnp get, walk or nothing else. => u understand it right ;) this only count on tools that query a snmp agent -| | | | To: 'Daniel Thivierge' <[EMAIL PROTECTED]> | | cc: | | Subject: RE: SuSE SLES 9 and disk IO | >--------------------------------------------------------------------------- --------------------------------------------------| Hello, i use Suse 9.0 and there is UCD-4xxx the snmpd , did SLES use net-snmp-5.1.xx ? If u mean UCD-DISKIO-MIB thats obsolete as far as i know. in common u can copy the mib to your main mib dir ( normaly /usr/share/snmp/mibs ) and add a -m ALL or add a MIBS=ALL directives to your snmp.conf and all snmptools (snmpget/set/walk..) could use the diskIO mib. Attentionm that only mean u can query an snmp agent that support the diskIO infos and wouldnt exoand your local snmpd. if u need that u must recompiling ;( but its not that difficult u could use checkinstall to made a rpm so u can simply install/remove it. Baumgart -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Daniel Thivierge Sent: Dienstag, 4. Januar 2005 19:17 To: net-snmp-users@lists.sourceforge.net Subject: SuSE SLES 9 and disk IO Hi all, The net-snmp include in SuSE SLES 9 did not have the disk IO mibs included. Is there a way to have the disk IO mibs to be part of the default without recompiling it? I guest something we could do in the config file... Thanks. ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users > Alexander Baumgart > Siemens AG, Transportation Systems, TS RA RD SD 11 > Ackerstrasse 22, 38126 Braunschweig, Germany > Tel.: (+49 531) 226-2953 > eMail: [EMAIL PROTECTED] > > > ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ Net-snmp-users mailing list Net-snmp-users@lists.sourceforge.net Please see the following page to unsubscribe or change other options: https://lists.sourceforge.net/lists/listinfo/net-snmp-users
