Thomas Anders wrote:
Daniel Romeo wrote:
  
I've implemented HP (Hewlett Packard) Insight manager agents on Proliant 
server (Enterprise Linux 3) which it had installed MRTG aplication using 
net-snmp pack. Now, Insight agents need run with ucd-snmp pack, but they 
exist problems to do functionally both. Agents hang up mrtg functions 
and the server begining to swap. Did someone meet the same problem?
    

I'm not sure I understand your problem from the above description. Can
you please elaborate and provide *details*?

Are you using the latest HP Insight Manager Agents for RHEL3 from
http://h18023.www1.hp.com/support/files/server/us/download/22880.html?jumpid=reg_R1002_USEN
? I don't think they require "ucd-snmp" (like you said), but are rather
believed to work fine (as dlmod modules) with any recent net-snmp package.


+Thomas

  
Hi Thomas,
Congratulations! I'm not sure too...
A couple of details: the latests version is  hpasm-7.5.1-8.rhel3.i386.rpm.

[EMAIL PROTECTED] root]# snmpd -H
cmaX: sent ColdStarts on ports 25376 to 25393
cmaX: listening for subagents on port 25375
Configuration directives understood:
  In snmpd.conf and snmpd.local.conf:
    authtrapenable  1 | 2               (1 = enable, 2 = disable)
    trapsink        host [community] [port]
    trap2sink       host [community] [port]
    informsink      host [community] [port]
    trapsess        [snmpcmdargs] host
    trapcommunity   community-string
    agentuser       userid
    agentgroup      groupid
    agentaddress    SNMP bind address
    dlmod           module-name module-path
    syslocation     location ..............

When I executed  #hpasm activate

NOTE: It has been determined that your existing SNMP software stack will not
work correctly with many of the management agents in this package. In order
to successfully integrate those agents, one of the following prerequisites
must be satisfied:
      * Install an SNMP stack with the hp ProLiant Managment Extension built
        in.  RPMS are available from
        http://h18023.www1.hp.com/support/files/server/us/download/19125.html

         (ucd-snmp-4.2.5-79.rhel3.i386)

  -- OR --

      * Install an SNMP stack with the standard dlmod Extension built in.
        This can be accomplished by building the SNMP stack from the source
        with the --with-dlmod option in the configuration step. Source is
        available from http://www.net-snmp.org/
Press any key to continue...
Most Management Agents will not work properly under this condition.
The affected agents will be excluded from starting up. Once you have
satisfied the prerequisite, you can run "/etc/init.d/hpasm reconfigure"
to bring those agents online

Please answer 'y' to this prompt to confirm that you read above notice .....
---------------------------------------------------------------------------------
 
I modified snmpd.conf to work with the net-snmp tar installation, but mrtg hang up after a regular time and server swaps.
Do you suggest uninstall ucd-snmp stack though it is deactivated?


-- 
Greetings, Daniel Romeo.

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users

Reply via email to