> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On
> Behalf Of Jack G Atkinson Jr
> snmpget -v 1 -c 'public' 192.168.15.254 'adGenEasyBridgeIndexNext.0'
> ADTRAN-GENERIC-BRIDGE-MIB::adGenEasyBridgeIndexNext.0 = INTEGER: 28
>
> snmpset -v 1 -c 'public' 192.168.15.254
> 'adGenEasyBridgeRowStatus.28' i 5
> Timeout: No Response from 192.168.15.254
>
> Whatever, I try to set, gets the same response.
Check your community name. Most "hack me" installations use the
"private" community for writing. Try setting the timeout very high, say 5
minutes, in case the processing is taking a very long time. I'm guessing you
can use the adGenEasyBridgeIndexNext object to tell if the row create request
was processed - if it does not increment, the request was probably not received.
HTH,
Mike
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
