Mike Ayers wrote:
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] On
>> Behalf Of Jack G Atkinson Jr
>>
>
>
>
>> snmpget -v 1 -c 'public' 192.168.15.254 'adGenEasyBridgeIndexNext.0'
>> ADTRAN-GENERIC-BRIDGE-MIB::adGenEasyBridgeIndexNext.0 = INTEGER: 28
>>
>> snmpset -v 1 -c 'public' 192.168.15.254
>> 'adGenEasyBridgeRowStatus.28' i 5
>> Timeout: No Response from 192.168.15.254
>>
>> Whatever, I try to set, gets the same response.
>>
>
> Check your community name. Most "hack me" installations use the
> "private" community for writing. Try setting the timeout very high, say 5
> minutes, in case the processing is taking a very long time. I'm guessing you
> can use the adGenEasyBridgeIndexNext object to tell if the row create request
> was processed - if it does not increment, the request was probably not
> received.
>
>
> HTH,
>
> Mike
>
>
It was the community name. Private did the trick. Thanks.
--
------------------------------------------------------------------
Jack G. Atkinson Jr.
[EMAIL PROTECTED]
Romans 5:6-10 - God loved us while we were unlovable!
Luke 12:36-47 - Be ready!
------------------------------------------------------------------
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Net-snmp-users mailing list
[email protected]
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
