On 11 November 2011 13:55, Waqas Ahmed Khan <waqas.ahm...@gmail.com> wrote:
> The problem is
> this that net-snmp is detecting my ipv6 based windows and linux machines.
> but it is not detecting my CISCO routers and switches.
> But for CISCO Router it always gives this error:
>
> # snmpstatus -v2c -c PxxTC udp6:[24xx:fcxx:8xxx:2xx::2]:161
> Timeout: No Response from udp6:[24xx:fcxx:8xxx:2xx::2]:161
These may be obvious questions, but:
- does the Cisco box support SNMP access over IPv6?
- if so, is this support enabled? (either by default, or explicitly)
- does the box limit who can query it?
- if so, is the system you are using as a management station,
configured as an authorised source?
It might be worth checking SNMP-over-IPv4, just to see if that's
working or not.
Dave
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
