I am using net-snmp ver5.7.1 and config snmpd as a master agent and using my
app as a sub agent.
I am working on ARM linux and compile net-snmp on version 2.
on snmpd.conf file I added "trapsink 192.168.2.5"
it means I want to send traps to 192.168.2.5.
when I run snmpd and then my subagent it works and I can send traps on sub
agent to 192.168.2.5
and manager will receive all traps.
in that case I can read by MG-soft these tables:
snmpTargetAddrTable:
Instance ----------->internal0
snmpTargetAddrName(IDX, IMP) ----------->Not accessible
snmpTargetAddrTDomain ----------->snmpUDPDomain
snmpTargetAddrTAddress -----------> C0.A8.02.05.00.A2 (hex)
snmpTargetAddrTimeout----------->0
snmpTargetAddrRetryCount----------->0
snmpTargetAddrTagList ----------->internal0
snmpTargetAddrParams ----------->internal0
snmpTargetAddrStorageType----------->readOnly(5)
snmpTargetAddrRowStatus -----------> active(1)
snmpTargetParamsTable:
Instance -----------> internal0
snmpTargetParamsName(IDX, IMP)----------->Not accessible
snmpTargetParamsMPModel----------->0
snmpTargetParamsSecurityModel----------->1
snmpTargetParamsSecurityName----------->public
snmpTargetParamsSecurityLevel----------->noAuthNoPriv(1)
snmpTargetParamsStorageType----------->readOnly(5)
snmpTargetParamsRowStatus----------->active(1)
snmpNotifyTable:
Instance -----------> internal0
snmpNotifyName(IDX, IMP) ----------->Not accessible
snmpNotifyTag ----------->internal0
snmpNotifyType ----------->trap(1)
snmpNotifyStorageType ----------->readOnly(5)
snmpNotifyRowStatus ----------->active(1)
next time i removed "trapsink 192.168.2.5" from snmpd.conf and raster snmpd ,
there is nothings on that tables.
I want to added some rows on that tables manually to have destination target
address like before.
my sequence is( using MG-soft):
Step1 :
First of all as the document says
Get snmpTargetSpinLock valule it return 0
Step2:
then Set snmpTargetSpinLock to 0 again
Step3:
Get snmpTargetSpinLock , it return 1(for test)
Step4:
adding new row with index internal0 and change snmpTargetAddrTable like
this(by MG-soft add row)
Instance ----------->internal0
snmpTargetAddrName(IDX, IMP) ----------->Not accessible
snmpTargetAddrTDomain ----------->snmpUDPDomain.0
snmpTargetAddrTAddress -----------> C0.A8.02.05.00.A2 (hex)
snmpTargetAddrTimeout----------->0
snmpTargetAddrRetryCount----------->0
snmpTargetAddrTagList ----------->internal0
snmpTargetAddrParams ----------->internal0
snmpTargetAddrStorageType----------->readOnly(5)
snmpTargetAddrRowStatus -----------> createAndGo(4)
after I set all of them , return an error that I can not write
snmpTargetAddrStorageType >readOnly(5)
but I can write snmpTargetAddrStorageType >other(1)
after that when i read the row it returns:
snmpTargetAddrName(IDX, IMP) ----------->Not accessible
snmpTargetAddrTDomain ----------->snmpUDPDomain.0
snmpTargetAddrTAddress -----------> C0.A8.02.05.00.A2 (hex)
snmpTargetAddrTimeout----------->1500
snmpTargetAddrRetryCount----------->3
snmpTargetAddrTagList ----------->internal0
snmpTargetAddrParams ----------->internal0
snmpTargetAddrStorageType----------->other(1)
snmpTargetAddrRowStatus ----------->active(1)
Step5:
like step4 i added a row to snmpTargetParamsTable and it returns :
Instance -----------> internal0
snmpTargetParamsName(IDX, IMP)----------->Not accessible
snmpTargetParamsMPModel----------->0
snmpTargetParamsSecurityModel----------->1
snmpTargetParamsSecurityName----------->public
snmpTargetParamsSecurityLevel----------->noAuthNoPriv(1)
snmpTargetParamsStorageType----------->other(1)
snmpTargetParamsRowStatus----------->active(1)
most of the time ,snmpTargetParamsRowStatus----------->notReady(3)(I dont know
why)
Step6:
like step4 i added a row to snmpNotifyTable and it returns :
Instance -----------> internal0
snmpNotifyName(IDX, IMP) ----------->Not accessible
snmpNotifyTag ----------->internal0
snmpNotifyType ----------->trap(1)
snmpNotifyStorageType ----------->other(1)
snmpNotifyRowStatus ----------->active(1)
in that case still I can not receive any traps.
my console return an error like this 2 times:
unsupported domain for target address table entry internal0.
I am realy confused what should I do,
I have read lots of docs ,is there any thing wrong .
I would be grateful if someone could help me.
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_feb
_______________________________________________
Net-snmp-users mailing list
Net-snmp-users@lists.sourceforge.net
Please see the following page to unsubscribe or change other options:
https://lists.sourceforge.net/lists/listinfo/net-snmp-users
