the other month while bored out my skull at work i had my snips in hand and was using them as drum sticks against the bench and metal safety barrier and doing so with enough force to bounce my mobile phone around (had ear plugs in so it was ok). i consequently struck my still-fairly-brand-new-to-me mobile phone and cracked the top-left corner of the "screen".
i put up with it out for a month or so and the other day thought i'd be clever and replace the touch digitizer (not the LCD screen). i found the part for £12.50 and when i got home last night attempted to fit it. i totally cracked the existing touch screen trying to remove it from the device despite heating it with a hair dryer for several minutes. smeared some of the glue on the bare LCD screen in the process. made it worse by trying to clean it off with Isopropanol Alcohol. reduced smearing to little consequence using old shirt. stuck new digitizer to screen before realizing the little ribbon cable was sticking out in the wrong place and then had to unstick it and poke it through the right place. got it all together and everything seemed to be working fine. no one at half past one in the morning i could phone to test that so left it. it all seemed fine anyway nothing to worry about. karly rang me this morning and couldn't hear me at all. the mic no longer works. -- http://jwm-art.net/ image/audio/text/code/ _______________________________________________ NetBehaviour mailing list [email protected] http://www.netbehaviour.org/mailman/listinfo/netbehaviour
