Just a quick message to hypercom I/O card users here. New drivers are available from: http://www.vmc.de/ger_vmc_main.html I know this is the German site but the English one isn't available at the moment. The driver docs. are in English as well as German though. Also those of you with Hypercom1 A1200 I/O cards that have problems with freezing of modem internet connections should check the fix on the same site. This only effects HyperCOM 1 cards with a Startech/EXAR ST16C650 chip with the label "DC 9737" apparently though. Full instructions are available in English from the abouve site. Hopefully a simular mod will fix the same problem I have with the Hypercom 3Z. At the moment details on the fix for this card is not yet complete though :-( Cheers. -- Jason Watson. ==================================================== Towerised A4K, WB3.1, CS-PPC 060-60 604-200 2+64MB, CV-643D 4MB (CGfx4.1), 2.1GB IDE (PFS2), Atapi ZIP, 6x2x2 CD-RW (IDEFix97 3.4). Dynalink 33.6 Modem (NC v 2.3) ==================================================== _____________________________________________________________ NetConnect mailing list. To unsubscribe, send an 'unsubcribe' message to <[EMAIL PROTECTED]>
