On 17-Jul-99, Mike Carter spewed forth the following...
>hello,
>Has anybody spent a little time to get this sort of set-up working
>with the standard NetConnect2: and AmiTCP: assigns etc. ??
>I found a script in AmiTCP:Bin/startnet which issuppost (I think) to
>get you connected but it don't work and never finds my provider. Also
>it attempts to access NetConnect: assign. But I altered this.
I think these are the leftovers from the old AmiTCP part of NC1.
>If anybody has solved this task would they share the ascript with me.
>Or can anybody tell me the exact commands to stick in my script.
>I've used:
>AmiTCP:Genesis ONLINE USER=Root
You need specify your provider with PROVIDER=xxx, and I didn't need
to include the ONLINE command - if you already have Genesis
configured to go online automatically, then everything should proceed
as normal.
>I start Genesis but it doesn't auto dial and connect :(
>Any help appreciated.
I've put together a somewhat ugly script that does the job, but it's
by no means perfect - a mix of CLI and AREXX. I'll send the script
separately so as not to incurr the wrath of the NC collective. Just
edit the provider and user details, and you might have to alter the
wait delay depending on how quick your initial connection is. Oh, if
Voyager is already running it will account for this, too.
Bablos.
Angband Variants Page;
http://wkweb5.cableinet.co.uk/bablos/angband
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
