I saw this and gotta say this:
Thanks for the advice Andrew. Its still doing the same thing though.
May be its my set up (A1200. 030, Hypercomm 1) or the baud rate of the
serial connectuon (!) its set at 230400 (on a magic express 56).
Although it must be said that it seems to work alright with Voyager 2
(except I get stalls & jam up's when load big pictures) & microdot
(when it doesn't crash)
I'll keep trying though, but I'm gonna give up
soon & ask for a refund !!
Stuart
> Hi all,
>
> > Now I got trouble with mFTP (and the older one). They connect and all
> > that, but it starts to download (after I doulble click on the LHa or
> > LHz file - is that right - docs are scant) & the window comes up and
> > it down loads only 2% then just hangs. How long should something like
> > this take on an 18 meg 1200 ?
>
> With the newer mFTP you should open up the application, select the profile
> you want to connect with, then select "Edit..." before you connect. Change
> the "Single Pane" to "Double Pane" (I'm at work, and can't remember the
> exact name, but it should be obvious), then connect. You should have an
> AmFTP type display now, with you local drives on the left hand side of the
> screen, and the FTP site on the right hand side. You can now drag'n'drop
> files across. Double clicking on a file opens it in "View" mode, and I'm
> unsure of how an archive will be handled. On NC2, it should be handled by
> X-Arc, but on NC3 I don't know (yet). Copying the archive to your local
> drive and dearchiving from there is easiest.
>
> > Still not got an update of V3 of webvison !!! Lucky I had NC2.
>
> You can get V3 from http://v3.vapor.com and WebVision from:
>
> http://ftp.uni-paderborn.de/pub/aminet/comm/tcp/WebVision22a.lha
>
> Hope this helps,
>
> Totty <8^)
>
>
> _____________________________________________________________
> NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
> message to <[EMAIL PROTECTED]>
>
>
--
Stuart
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
