*IAN GREENWAY* WROTE

> Jason Hillage is getting confused:
          /That's an understatement.../  ;-)

 
> >    I've noticed that Voyager has been coming up with a few errors on
> > my system lately. When it doesn't crash, it gives me a recoverable
> > alert ( usually  0100 000F - somethin' to do with exec I believe? ).
> 
> Guru 0100000F  is "Memory header not located". Probably due to trashed
> RAM.
                /Where can I find a list of all these codes? I've/
/tried a few progs, but they seem a bit unsure too/

> > Snoopdos reports this happening usually with V's "Image Decoder" or
> > "file... something-or-other".
> 
> Snoopdos is not the tool to be determining when that sort of error
> happens. It is useful for "file not found" errors and suchlike.
> Enforcer or Mungwall clones are better.

         /Thanks for that - I'll try a couple off  my AFCD's/
> 
> > 1.  Does anyone know which processor Voyager is coded for? Is it a
> 
> I dunno if its 020+ or plain 68000, but the cpu-intesive bits have
> modular code optimised for each processor, automatically.
> 
> > 2.  Could the problem be with any part of my hardware? Or even
> > software; maybe some part of DOpus or a datatype or something?
> 
> Very likely.  I've found it objects quite strongly to some patches and
> not to others. The FBlit util ought to have "V" disabled and it needs
> Executive to be configured for it.  Its perfectly stable here with
> other patches like Birdie, MCP, VisualPrefs, some of FBlit, as well
> as utils like DOpus MagII.  Just check you aren't running anything too
> offensive and its an up-to date version.
> 
> > 3.  Has anybody else encountered a similar problem? 
> 
> Many ppl have problems. :-)  Usually some clever and helpful person
> on this list manages to provide a solution!
> 
> Can you give some more info? You say this happens "lately" - since you
> installed what? Which version of V are you running? Are you sure you
> installed it all correctly? etc etc....
> 
> Cheers,
> 
> Ian
> ===

       Thanks Ian   -   _Jayce_



-- 
        Jayce's Machine Setup:

Amiga A1200 in Power Tower, Z4 Busboard, 1.3Gig Hard Drive, 
32x CD-ROM, Magnum '060/50 with 32Meg FastRAM,  Picasso IV GFX board,
Pace 56k Modem, IOBlix Zorro II multi I/O interface, 
Buddha/Catweasel MkII Zorro,  Belinea 10 30 10 Multiscan monitor 
DOpus Magellan II as WBR, P96
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>

Reply via email to