Hello Tony
On 22-Mar-00, you wrote:
> I've just sent my A4000 off for a grease & oil change. When it comes
> back I'm going to cut over the A2000 to the A4000.
>
> I don't want to blindly copy everything since I've accumulated lots of
> garbage on my HD in the 10 years I've had it. So I plan to back up
> everything to a CD and only restore the bits I need.
>
> What do I need to restore to keep NC3 in synch?
The most important thing is your NC3 key in "S:"
Then it depends on what you want to keep.
you can keep all your libs if you want, but I expect there are a few you
don't use any more. When you install your programs over to your new machine
and try to start up anything, if your missing a lib or a device the program
usually tells you.
If your backing up to CD, then all your Workbench partition should easilly
go on one CD, then anything else you cant find on AACDs or AFCDs.
Steve
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
