, <[EMAIL PROTECTED]> wrote: > >2) Running the modem too fast on your Amiga, which results in corrupt > >data being sent to your ISP, which results in a false login. > > I am using a 28.8 Modem. I will try a slower speed. I > think the port speed is 38400. Is that two much for the > Amiga? I have an A4000T with an '060 PowerUp board and > 64MB RAM. > With a 060 38400 should not be a problem. Unless there is something wrong with your serialport or the modem. I had no problems earlier when I used a 040/25mhz with 57600 on the standard serialport. You said that AmiTCP4-demo worked earlier. Try it again and if it works, Genesis should work using the same settings, since Genesis is built on AmiTCP (only a newer version) Also you said that it didnt work with the PPP in OS3.5 either... is this the Miami demo you mean ? In that case its worrying. I always could get Miami to work when Genesis wouldnt. (I never got it to work with my ISDN-Master card) You could try using some other serial-drivers if serial.device doesnt work well for you. There are several on aminet, 8N1.device the most updated I think, but also there is artser.device and BaudBandit.device -- regards, -- Anbjoern Myren, Norway, A4000/040, ICQ:63524151, IRC: AnMy, http://home.sol.no/~amyren/ _____________________________________________________________ NetConnect mailing list. To unsubscribe, send an 'unsubcribe' message to <[EMAIL PROTECTED]>
