Hi Roy,
I have my modem and null modem cable on a hypercom3 (it has 2 serial
ports) I have also tried the null modem cable on the old serial port
but makes no diferance. Both of the connections are using PPP in
genesis, I dont know if this can only work one connection at a time, I
take it you ethernet connection uses its own device so you would have
no probs, just a thought I realy dont know much about networking :-)
Thanks
Clint Watterson.
> Clint,
>
> I have run an Ethernet connection to a PC at the same time as running a
> dialup connection from the Amiga. That's a very similar setup to the one you
> describe and I have not had the problems you report. Don't think me daft,
> but I assume you have added serial ports in order to run two serial
> processes simultaneously. I used an IOBLIX until it was destroyed in a
> lightening storm (hence the reply via the PC!).
>
> Regards
> Roy Leith
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
> Behalf Of Clint Watterson
> Sent: 20 September 2001 22:51
> To: [EMAIL PROTECTED]
> Subject: [netconnect] Genesis networking
>
>
>
> Hi
> I have just set up a network (null modem) with two amigas running
> genesis, that is working fine but one of the machines has a internet
> conection using genesis as well. When I have the two amigas connected
> and then with the one with the internet conection I go on the internet
> the connection between the two amigas goes off line. The same hapenes
> if I do it the other way around, go on the internet THEN connect the
> two amigas makes the internet connection go offline.
>
> please help :-(
>
>
> Clint.
> --
> ICQ #54933999
>
> Amiga 1200 Power Tower, OS 3.9, Mediator+ Voodoo3 3000,
> Apollo 060/66MHz, 32 MB Fast Ram. 24x CD-ROM, 20.5GB FireBall hd
> with PowerFlyer Gold interface. Dynalink V.90 modem on a HyperCOM3.
>
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
