On Mon, 23 Jan 2006 20:03:15 +0200 Pekka Pietikainen <[EMAIL PROTECTED]> wrote:
> > On Wed, 11 Jan 2006 14:00:17 -0800 > > Stephen Hemminger <[EMAIL PROTECTED]> wrote: > >> On Wed, 11 Jan 2006 21:16:40 +0300 > >> > >> > 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E > >> > Gigabit Ethernet Controller (rev 19) > >> > >> What is the chip revision, reported on dmesg output. Something like: > >> > >> [ 27.769459] sky2 v0.12 addr 0xdfcfc000 irq 177 Yukon-EC (0xb6) rev 1 > >> [ 27.770012] sky2 eth0: addr 00:11:11:ed:c2:2e > >> [ 245.515149] sky2 eth0: enabling interface > >> [ 247.966639] sky2 eth0: phy interrupt status 0x1c40 0xbc4c > >> [ 247.967056] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow > >control both > >> > >Still need to know the chip revision.. > Mine does the same, lspci says 88E8053 rev 15, modprobe sky2 says > > ACPI PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 7 (level, low) > sky2 v0.13 addr 0xd0020000 irq 7 Yukon-EC (0xb6) rev 1 > sky2 eth0: addr 00:10:f3:06:73:d0 > sky2 0000:01:00.0: pci express error (0x0) > printk: 447465 messages supressed. > sky2 0000:01:00.0: pci express error (0x0) > printk: 447465 messages supressed. > ... > > and the box dies > > The box is a Nexcom NSA 1086 with 4x skge ports and 4x sky2. acpi=off made > the driver work apparently, haven't used it with much load yet, though. > > sk98lin (8.23 and 8.28 tried) both work ok with ACPI enabled. Not admittedly > exactly the same kernel (for sk98lin it's a Fedora updates-testing > 2.6.15, for sky2 it's a Fedora 2.6.16rc1-git1, which included > sky2 v0.13). I have one of those Nexcom boxes. Could you send me the full kernel config. - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
