On Thu, 2006-03-23 at 14:16 -0800, walt wrote: > I update from Linus's git repository every morning, and today > I got this error: > > tg3.c:v3.53 (Mar 22, 2006) > PCI: Enabling device 0000:00:09.0 (0014 -> 0016) > ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 18 (level, low) -> IRQ 17 > tg3: Could not obtain valid ethernet address, aborting. > ACPI: PCI interrupt for device 0000:00:09.0 disabled > tg3: probe of 0000:00:09.0 failed with error -22 >
These are the patches between 3.52 and 3.53: [TG3]: Bump driver version and reldate. [TG3]: Skip phy power down on some devices [TG3]: Fix SRAM access during tg3_init_one() [TG3]: Don't mark tg3_test_registers() as returning ... [TG3]: make drivers/net/tg3.c:tg3_request_irq() static [TG3]: netif_carrier_off runs too early; could still .. I cannot think of anything in here that can cause MAC address failure on your 5702. The 3rd one "Fix SRAM access .." is a remote and only possibility. Can you back out that patch to see if it works? Let me know if you want me to send you the patch. I tested some 5702 NICs here and they worked fine. Thanks. - To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
