This addresses the following issues:
- $@ is an array, so don't use it in quoted strings - use $* instead.
- Add missing quotes to components of [ ] expressions. These are not
strictly necessary since the output of 'wc -l' should be a single word
only, but in case of errors, bash prints "integer expression expected"
instead of "too many arguments".
- Use -print0/-0 when piping from find to xargs to allow for filenames
which contain whitespace.
- Quote arguments to 'eval' to prevent word-splitting.
Signed-off-by: Phil Sutter <p...@nwl.cc>
---
examples/cbq.init-v0.7.3 | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/examples/cbq.init-v0.7.3 b/examples/cbq.init-v0.7.3
index 1bc0d446f8983..66448d88f0053 100644
--- a/examples/cbq.init-v0.7.3
+++ b/examples/cbq.init-v0.7.3
@@ -532,7 +532,7 @@ cbq_off () {
### Prefixed message
cbq_message () {
- echo -e "**CBQ: $@"
+ echo -e "**CBQ: $*"
} # cbq_message
### Failure message
@@ -560,15 +560,15 @@ cbq_time2abs () {
### Display CBQ setup
cbq_show () {
for dev in `cbq_device_list`; do
- [ `tc qdisc show dev $dev| wc -l` -eq 0 ] && continue
+ [ "`tc qdisc show dev $dev| wc -l`" -eq 0 ] && continue
echo -e "### $dev: queueing disciplines\n"
tc $1 qdisc show dev $dev; echo
- [ `tc class show dev $dev| wc -l` -eq 0 ] && continue
+ [ "`tc class show dev $dev| wc -l`" -eq 0 ] && continue
echo -e "### $dev: traffic classes\n"
tc $1 class show dev $dev; echo
- [ `tc filter show dev $dev| wc -l` -eq 0 ] && continue
+ [ "`tc filter show dev $dev| wc -l`" -eq 0 ] && continue
echo -e "### $dev: filtering rules\n"
tc $1 filter show dev $dev; echo
done
@@ -585,7 +585,7 @@ cbq_init () {
### Gather all DEVICE fields from $1/cbq-*
DEVFIELDS=`find $1 -maxdepth 1 \( -type f -or -type l \) -name 'cbq-*' \
- -not -name '*~' | xargs sed -n 's/#.*//; \
+ -not -name '*~' -print0 | xargs -0 sed -n 's/#.*//; \
s/[[:space:]]//g; /^DEVICE=[^,]*,[^,]*\(,[^,]*\)\?/ \
{ s/.*=//; p; }'| sort -u`
[ -z "$DEVFIELDS" ] &&
@@ -593,7 +593,7 @@ cbq_init () {
### Check for different DEVICE fields for the same device
DEVICES=`echo "$DEVFIELDS"| sed 's/,.*//'| sort -u`
- [ `echo "$DEVICES"| wc -l` -ne `echo "$DEVFIELDS"| wc -l` ] &&
+ [ "`echo "$DEVICES"| wc -l`" -ne "`echo "$DEVFIELDS"| wc -l`" ] &&
cbq_failure "different DEVICE fields for single
device!\n$DEVFIELDS"
} # cbq_init
@@ -618,7 +618,7 @@ cbq_load_class () {
PRIO_MARK=$PRIO_MARK_DEFAULT
PRIO_REALM=$PRIO_REALM_DEFAULT
- eval `echo "$CFILE"| grep -E "^($CBQ_WORDS)="`
+ eval "`echo "$CFILE"| grep -E "^($CBQ_WORDS)="`"
### Require RATE/WEIGHT
[ -z "$RATE" -o -z "$WEIGHT" ] &&
@@ -661,7 +661,7 @@ if [ "$1" = "compile" ]; then
### echo-only version of "tc" command
tc () {
- echo "$TC $@"
+ echo "$TC $*"
} # tc
elif [ -n "$CBQ_DEBUG" ]; then
@@ -669,13 +669,13 @@ elif [ -n "$CBQ_DEBUG" ]; then
### Logging version of "ip" command
ip () {
- echo -e "\n# ip $@" >> $CBQ_DEBUG
+ echo -e "\n# ip $*" >> $CBQ_DEBUG
$IP "$@" 2>&1 | tee -a $CBQ_DEBUG
} # ip
### Logging version of "tc" command
tc () {
- echo -e "\n# tc $@" >> $CBQ_DEBUG
+ echo -e "\n# tc $*" >> $CBQ_DEBUG
$TC "$@" 2>&1 | tee -a $CBQ_DEBUG
} # tc
else
@@ -711,8 +711,8 @@ if [ "$1" != "compile" -a "$2" != "nocache" -a -z
"$CBQ_DEBUG" ]; then
### validate the cache
[ "$2" = "invalidate" -o ! -f $CBQ_CACHE ] && VALID=0
if [ $VALID -eq 1 ]; then
- [ `find $CBQ_PATH -maxdepth 1 -newer $CBQ_CACHE| \
- wc -l` -gt 0 ] && VALID=0
+ [ "`find $CBQ_PATH -maxdepth 1 -newer $CBQ_CACHE| \
+ wc -l`" -gt 0 ] && VALID=0
fi
### compile the config if the cache is invalid
--
2.13.1
