pci_enable_msi failure is a normal event so we should not print any error.
Going over the code I spotted a missing pci_disable_msi() leak when irq
allocation fails. The whole code also needed a cleanup, so I combined the
two different calls to pci_request_irq into a single call making this
look a lot better. All #ifdef CONFIG_PCI_MSI's have been removed.
Compile tested with both CONFIG_PCI_MSI enabled and disabled.
Signed-off-by: Auke Kok <[EMAIL PROTECTED]>
Cc: H. Peter Anvin <[EMAIL PROTECTED]>
---
drivers/net/e1000/e1000.h | 4 +---
drivers/net/e1000/e1000_main.c | 39 ++++++++++++++-------------------------
2 files changed, 15 insertions(+), 28 deletions(-)
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index a9ea67e..16a6edf 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -333,11 +333,9 @@ struct e1000_adapter {
struct e1000_tx_ring test_tx_ring;
struct e1000_rx_ring test_rx_ring;
-
int msg_enable;
-#ifdef CONFIG_PCI_MSI
boolean_t have_msi;
-#endif
+
/* to not mess up cache alignment, always add to the bottom */
boolean_t tso_force;
boolean_t smart_power_down; /* phy smart power down */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 637ae8f..49be393 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -158,9 +158,7 @@ static struct net_device_stats * e1000_get_stats(struct
net_device *netdev);
static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
static int e1000_set_mac(struct net_device *netdev, void *p);
static irqreturn_t e1000_intr(int irq, void *data);
-#ifdef CONFIG_PCI_MSI
static irqreturn_t e1000_intr_msi(int irq, void *data);
-#endif
static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter,
struct e1000_tx_ring *tx_ring);
#ifdef CONFIG_E1000_NAPI
@@ -300,31 +298,26 @@ module_exit(e1000_exit_module);
static int e1000_request_irq(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- int flags, err = 0;
+ void (*handler) = &e1000_intr;
+ int irq_flags = IRQF_SHARED;
+ int err;
- flags = IRQF_SHARED;
-#ifdef CONFIG_PCI_MSI
if (adapter->hw.mac_type >= e1000_82571) {
- adapter->have_msi = TRUE;
- if ((err = pci_enable_msi(adapter->pdev))) {
- DPRINTK(PROBE, ERR,
- "Unable to allocate MSI interrupt Error: %d\n", err);
- adapter->have_msi = FALSE;
+ adapter->have_msi = !pci_enable_msi(adapter->pdev);
+ if (adapter->have_msi) {
+ handler = &e1000_intr_msi;
+ irq_flags = 0;
}
}
- if (adapter->have_msi) {
- flags &= ~IRQF_SHARED;
- err = request_irq(adapter->pdev->irq, &e1000_intr_msi, flags,
- netdev->name, netdev);
- if (err)
- DPRINTK(PROBE, ERR,
- "Unable to allocate interrupt Error: %d\n", err);
- } else
-#endif
- if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags,
- netdev->name, netdev)))
+
+ err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
+ netdev);
+ if (err) {
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
DPRINTK(PROBE, ERR,
"Unable to allocate interrupt Error: %d\n", err);
+ }
return err;
}
@@ -335,10 +328,8 @@ static void e1000_free_irq(struct e1000_adapter *adapter)
free_irq(adapter->pdev->irq, netdev);
-#ifdef CONFIG_PCI_MSI
if (adapter->have_msi)
pci_disable_msi(adapter->pdev);
-#endif
}
/**
@@ -3744,7 +3735,6 @@ e1000_update_stats(struct e1000_adapter *adapter)
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
-#ifdef CONFIG_PCI_MSI
/**
* e1000_intr_msi - Interrupt Handler
@@ -3810,7 +3800,6 @@ e1000_intr_msi(int irq, void *data)
return IRQ_HANDLED;
}
-#endif
/**
* e1000_intr - Interrupt Handler
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
