Send netdisco-users mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/netdisco-users
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of netdisco-users digest..."
Today's Topics:
1. Re: Router Acess (Nick Nauwelaerts)
2. Re: Poller Performance (Nick Nauwelaerts)
--- Begin Message ---
rancid, which most ppl just use for backups, can just as well be used to script
things. either via dump cli commands or via expect (the original cli
interaction language :) )
the beauty there is that it's actively maintained and has support for the cli
quirks of loads of devices and os versions. not that important if all you need
is "show ip arp", but for anything more complex it tries to handle all the
corner cases. also done in perl & expect (and a bit of python since 3.10)
homepage: http://rancid.shrubbery.net/rancid/
source: https://github.com/haussli/rancid
made updating 250 cisco small business switches a 1 hour task, and i didn't
have to deal with one of the worst remote consoles ever made.
https://github.com/ytti/oxidized should also be able to do about the same.
if we ever want to do more via cli, then i'm thinking of just interfacing with
one of those 2 projects instead of trying to reinvent the wheel. according to
the manual https://github.com/haussli/rancid/blob/master/lib/rancid.pm.in could
be used as a gateway: "Specifically, the library is used by rancid(1), but it
could be used by any perl program for site-specific handling or additional
automata."
// nick
From: Oliver Gorwits [mailto:[email protected]]
Sent: Thursday, October 31, 2019 20:43
To: Tim Polimeni <[email protected]>; [email protected]
Subject: Re: [Netdisco] Router Acess
Hi Tim,
Currently there is no support for command-line (ssh) actions for port up/down.
The only command-line action we support is gathering of ARP tables.
This could be patched into Netdisco, but would need someone who understands
Perl very well. We have a framework for adding ssh/cli commands, but it has
never been used before for a realtime task like this, so it would be a real
experiment!
Alternatively, you might like to look at the Netmiko library (python), and
script this yourself.
regards,
oliver.
On Wed, 30 Oct 2019 at 17:34, Tim Polimeni
<[email protected]<mailto:[email protected]>> wrote:
Hello, I was looking thru the config file in
/netdisco/environments/deployment.yml I see that there is a place that you can
RW SNMP, however if you do not have RW SNM is there a way that if we have a
static UID/PW for routers VIA RADIUS that you can enter these credentials in
the file to admin up/down and do other tasks?
_______________________________________________
Netdisco mailing list
[email protected]<mailto:[email protected]>
https://sourceforge.net/p/netdisco/mailman/netdisco-users/
________________________________
Volg Aquafin op Facebook<https://www.facebook.com/AquafinNV> |
Twitter<https://twitter.com/aquafinnv> |
YouTube<http://www.youtube.com/channel/UCk_4P5BJ-MtEEDCkCsR_KqQ?feature=mhee> |
LinkedIN<http://www.linkedin.com/company/aquafin/products> |
Instagram<https://www.instagram.com/aquafin_nv/>
In het kader van de uitoefening van onze taken verzamelen we bij Aquafin
persoonsgegevens. Hoe we omgaan met deze gegevens en wat de rechten van de
betrokkenen zijn, kan je nalezen in onze privacy
policy<https://www.aquafin.be/nl-be/privacy-policy>.
P Denk aan het milieu. Druk deze mail niet onnodig af.
--- End Message ---
--- Begin Message ---
i don't think this ever got an answer, that i thought that there needed to be
at least 2 completed jobs before you get info there.
either wait for the schedule, or run a few discoverall / arpwalk via the web
interface.
// nick
From: Miha Kralj [mailto:[email protected]]
Sent: Tuesday, October 15, 2019 15:04
To: [email protected]
Subject: [Netdisco] Poller Performance
Hi,
I have problem with "Admin --> Poller Performance" tab, which gives me this
error:
The aren't enough jobs to report.
The error is the same as on your demo server:
https://netdisco2-demo.herokuapp.com/admin/performance
Installation is fresh and it seems that everything else works OK.
Scheduling is default, arp, mac, discover and nbtwalk is fine. Just Poller
Performance is empty.
What could be causing this problem?
Version is the latest 2.44.2:
Software
Version
App::Netdisco<http://netdisco.org/>
2.44.2
SNMP::Info<https://github.com/netdisco/snmp-info>
3.68
DB Schema<https://metacpan.org/module/netdisco-db-deploy>
60
PostgreSQL<http://www.postgresql.org/>
9.2.24
Perl<http://www.perl.org/>
5.16.3
________________________________
Volg Aquafin op Facebook<https://www.facebook.com/AquafinNV> |
Twitter<https://twitter.com/aquafinnv> |
YouTube<http://www.youtube.com/channel/UCk_4P5BJ-MtEEDCkCsR_KqQ?feature=mhee> |
LinkedIN<http://www.linkedin.com/company/aquafin/products> |
Instagram<https://www.instagram.com/aquafin_nv/>
In het kader van de uitoefening van onze taken verzamelen we bij Aquafin
persoonsgegevens. Hoe we omgaan met deze gegevens en wat de rechten van de
betrokkenen zijn, kan je nalezen in onze privacy
policy<https://www.aquafin.be/nl-be/privacy-policy>.
P Denk aan het milieu. Druk deze mail niet onnodig af.
--- End Message ---
_______________________________________________
Netdisco mailing list - Digest Mode
[email protected]
https://lists.sourceforge.net/lists/listinfo/netdisco-users
