Date: Wed, 18 Oct 2000 22:08:33 -000
From: Mike Millen <[EMAIL PROTECTED]>
Subject: hmmmmm does this mean what i think?
Hi Karen,
KL>i am using a us robatics 33.6k modem and lately when trying
KL>to run nt and some of my other programs b386 for example
KL>i get this message when connected after dialing...
KL>connect 1200
KL>followed by a lot of u u u u u u u u u's
I've seen something similar when it erroneously connects
without error-correction.
The default on my USR Courier is &M4 - Normal/ARQ mode, normal
if an ARQ (error correction) connection cannot be made.
These days you *never* want a non-corrected connection.
Use a normal terminal program (Telix, Procomm or similar),
type ATZ, then AT&M5, then AT&W to write the change into the
modem's NVRAM. (You should get "OK" prompts in-between each
command).
If it doesn't fix it, it certainly won't do any harm.
Good luck,
Mike
********************************************************
To unsubscribe from this list,
send a message to [EMAIL PROTECTED] with the single word
Unsubscribe
as the subject.
You MUST use the same address with which you subscribed!
********************************************************
