Leon, a couple comments inline...
Leon Koll wrote:
Hello,
could you help me with the following problem.
I have two hosts running S10u3/i86pc w/all latest patches, each one equipped
with QLogic HBA, connected to the McData FC switch.
I configured the FCIP interface on each node and tried to ping the neighbour
node - no success.
Do you get timeout, or other error?
I connected two hosts directly with FC cable and the ping started to work.
I connected the FC cables back to the FC switch, the ping still worked.
But after reboot the hosts got back to the non-working state.
How can this problem be solved?
Your help will be appreciated!
[i]-- leon[/i]
A useful data point would be if a luxadm forcelip on the port fixes things.
We had some bugs like this in the last six months, but I think you
should have all the fixes.
Thanks,
Aaron
ifconfig fcip0
fcip0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4>
mtu 65280 index 3
inet 172.16.1.1 netmask ffffff80 broadcast 172.16.1.127
ether 0:e0:8b:b:29:4a
This message posted from opensolaris.org
_______________________________________________
networking-discuss mailing list
[email protected]
_______________________________________________
networking-discuss mailing list
[email protected]
