Hello, I've got a build 63 T2000 set up with three zones. e1000g0 is plumbed and addressed in the global zone and is used also by local zones A and B. Both A and B have no routing/networking issues. e1000g1 is plumbed but not addressed in the global zone. Local zone C uses e1000g1 for its networking connectivity. I've added a secondary default route in the global on the same subnet that local zone C is addressed on. Local zone C uses that secondary default route as its only default route.
Zone C works fine for about 15-20 hours. After which, it cannot connect to any off-subnet addresses. The routing table looks fine and still has the correct default route. Zones A and B which are on the same subnet as the global zone, don't exhibit this problem at all. Neither /var/adm/messages nor dmesg show any errors. Does anyone have an idea what would cause this? Thank you in advance for your help. Any is greatly appreciated. Best Regards, Jason _______________________________________________ networking-discuss mailing list [email protected]
