Hi Jason,
Could you share some of you configuratoin info? zonecfg, route
setups, etc.?
Thanks
Steffen
Jason J. W. Williams wrote:
Hello,
I've got a build 63 T2000 set up with three zones. e1000g0 is plumbed
and addressed in the global zone and is used also by local zones A and
B. Both A and B have no routing/networking issues. e1000g1 is plumbed
but not addressed in the global zone. Local zone C uses e1000g1 for
its networking connectivity. I've added a secondary default route in
the global on the same subnet that local zone C is addressed on. Local
zone C uses that secondary default route as its only default route.
Zone C works fine for about 15-20 hours. After which, it cannot
connect to any off-subnet addresses. The routing table looks fine and
still has the correct default route. Zones A and B which are on the
same subnet as the global zone, don't exhibit this problem at all.
Neither /var/adm/messages nor dmesg show any errors.
Does anyone have an idea what would cause this? Thank you in advance
for your help. Any is greatly appreciated.
Best Regards,
Jason
_______________________________________________
networking-discuss mailing list
[email protected]
_______________________________________________
networking-discuss mailing list
[email protected]
