We are willing to assist your testing if you hit any issues. Cheers, Crisson On Wed, 2008-11-12 at 09:20 +0800, Crisson Hu wrote: > Hi Gordon, > > > The NICDRV today is quite easy comparing to years ago. You can get it > here: > http://greatwall.prc/solx86/Program/ProjPage/network-nic-qa/TOOLS/auto.tar > > only proceed the tests by three steps: > 1. Setup clients on both clients > ./setupclt.ksh > 2. Install (only bcm5756 machine) > ./install.sh > 3. Run (only bcm5756 machine) > ./run.sh > > You need setup a back-to-back test, i.e. connecting the 5756 port with > another port on another machine. It will spend one/two days to finish. > You can select `ONPIT' mode which will spend less time. > > > Regards > Crisson > On Tue, 2008-11-11 at 10:06 -0800, Gordon Ross wrote: > > Garrett D'Amore wrote: > > > Looks good to me. If you get it tested with NICDRV, you can list me as > > > a code reviewer. Are you going to file your own RTI for this? > > > > I might file the RTI if: the people in Beijing who normally maintain > > the bge driver don't pick up the change first, and if the regression > > testing burden isn't too onerous. This is not my primary area now. > > (A long time ago, it was all I did, but I have no desire to go back:) > > > > Thanks for the review, > > Gordon -- ************************************* * Guang-Hao, Crisson Hu * * China ERI, Sun Microsystems, Inc. * * Tel: +86-10-62673095 * *************************************
_______________________________________________ networking-discuss mailing list [email protected]
