Thank for your reply. I just tried to run NetworkManager today and it's seem to execute nm-applet automatically by NetworkManager.
and it's still shown the nm_dhcp_client dbus Error. Error: Could not acquire the NM DHCP client service. Message: (org.freedesktop.DBus.Error.AccessDenied) Connection ":1.43" is not allowed to own the service "org.freedesktop.nm_dhcp_client" due to security policies in the configuration file oh.. and my distribution is ubuntu 4.7.10 how should I fix the nm_dhcp_client dbus problem? What should I do? following is the entire NM message: # NetworkManager --no-daemon NetworkManager: <info> starting... NetworkManager: <info> eth0: Device is fully-supported using driver 'sky2'. NetworkManager: <info> (eth0): exporting device as /org/freedesktop/NetworkManager/Device/2 NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'. NetworkManager: <info> Bringing up device eth0 NetworkManager: <info> Deactivating device eth0. NetworkManager: <info> eth1: Device is fully-supported using driver 'bcm43xx'. NetworkManager: <info> (eth1): exporting device as /org/freedesktop/NetworkManager/Device/3 NetworkManager: <info> Now managing wireless (802.11) device 'eth1'. NetworkManager: <info> Bringing up device eth1 NetworkManager: <info> Deactivating device eth1. NetworkManager: <info> (eth0) supplicant interface is now in state 2 (from 1). NetworkManager: <info> (eth1) supplicant interface is now in state 2 (from 1). NetworkManager: <info> SWITCH: no current connection, found better connection 'Auto KGT700_DI624S (eth1)'. NetworkManager: <info> Activating device eth1 NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> Activation (eth1/wireless): access point 'Auto KGT700_DI624S' has security, but secrets are required. NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. NetworkManager: Missing or invalid key management NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) started... NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) scheduled... NetworkManager: <info> Activation (eth1) Stage 1 of 5 (Device Prepare) complete. NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) starting... NetworkManager: <info> Activation (eth1/wireless): connection 'Auto KGT700_DI624S' has security, and secrets exist. No new secrets needed. NetworkManager: <info> Config: added 'ssid' value 'KGT700_DI624S' NetworkManager: <info> Config: added 'key_mgmt' value 'NONE' NetworkManager: <info> Config: added 'auth_alg' value 'OPEN' NetworkManager: <info> Config: added 'wep_key0' value '<omitted>' NetworkManager: <info> Config: added 'wep_tx_keyidx' value '0' NetworkManager: <info> Activation (eth1) Stage 2 of 5 (Device Configure) complete. NetworkManager: <info> (eth1) Supplicant interface state change: 1 -> 2 NetworkManager: <info> (eth1) Supplicant interface state change: 2 -> 3 NetworkManager: <info> (eth1) Supplicant interface state change: 3 -> 0 NetworkManager: <info> (eth1) Supplicant interface state change: 0 -> 2 NetworkManager: <info> (eth1) Supplicant interface state change: 2 -> 3 NetworkManager: <info> (eth1) Supplicant interface state change: 3 -> 4 NetworkManager: <info> (eth1) Supplicant interface state change: 4 -> 7 NetworkManager: <info> Activation (eth1/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'KGT700_DI624S'. NetworkManager: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) scheduled. NetworkManager: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) started... NetworkManager: <info> Activation (eth1) Beginning DHCP transaction. Internet Systems Consortium DHCP Client V3.0.5 Copyright 2004-2006 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ NetworkManager: <info> dhclient started with pid 6167 NetworkManager: <info> Activation (eth1) Stage 3 of 5 (IP Configure Start) complete. Error: Could not acquire the NM DHCP client service. Message: (org.freedesktop.DBus.Error.AccessDenied) Connection ":1.42" is not allowed to own the service "org.freedesktop.nm_dhcp_client" due to security policies in the configuration file Listening on LPF/eth1/00:19:7e:8c:05:b0 Sending on LPF/eth1/00:19:7e:8c:05:b0 Sending on Socket/fallback DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6 DHCPOFFER from 192.168.2.1 DHCPREQUEST on eth1 to 255.255.255.255 port 67 DHCPACK from 192.168.2.1 Error: Could not acquire the NM DHCP client service. Message: (org.freedesktop.DBus.Error.AccessDenied) Connection ":1.43" is not allowed to own the service "org.freedesktop.nm_dhcp_client" due to security policies in the configuration file bound to 192.168.2.53 -- renewal in 284945 seconds. Thank you for helping me. Sincerely, Richard Chang 2007/11/20, Dan Williams <[EMAIL PROTECTED]>: > On Mon, 2007-11-19 at 20:33 +0800, Yung-Ting Chang wrote: > > Sorry for bothering all guys. > > I tried to svn check out Networkmanager-0.7 and nm-applet from SVN > > (revision 3095) > > i followed some information from mail-list and following is what's i did > > You'll likely want to run nm-applet to get a connection. NM won't do > anything without being told what connections it can use, and those are > provided by the applet. > > Cheers, > Dan > > > > > and following is the wpa_supplicant message: > > > > #wpa_supplicant -u -dd > > Providing DBus service 'fi.epitest.hostap.WPASupplicant'. > > Initializing interface 'eth0' conf 'N/A' driver 'wired' ctrl_interface > > 'N/A' bridge 'N/A' > > Initializing interface (2) 'eth0' > > EAPOL: SUPP_PAE entering state DISCONNECTED > > EAPOL: KEY_RX entering state NO_KEY_RECEIVE > > EAPOL: SUPP_BE entering state INITIALIZE > > EAP: EAP entering state DISABLED > > EAPOL: External notification - portEnabled=0 > > EAPOL: External notification - portValid=0 > > wpa_driver_wired_init: Added multicast membership with packet socket > > Own MAC address: 00:16:d3:5b:d2:ae > > Setting scan request: 0 sec 100000 usec > > Added interface eth0 > > Using wired driver - overriding ap_scan configuration > > Initializing interface 'eth1' conf 'N/A' driver 'wext' ctrl_interface > > 'N/A' bridge 'N/A' > > Initializing interface (2) 'eth1' > > EAPOL: SUPP_PAE entering state DISCONNECTED > > EAPOL: KEY_RX entering state NO_KEY_RECEIVE > > EAPOL: SUPP_BE entering state INITIALIZE > > EAP: EAP entering state DISABLED > > EAPOL: External notification - portEnabled=0 > > EAPOL: External notification - portValid=0 > > SIOCSIFFLAGS: No such device > > Could not set interface 'eth1' UP > > SIOCGIWRANGE: WE(compiled)=22 WE(source)=18 enc_capa=0xf > > capabilities: key_mgmt 0xf enc 0xf > > WEXT: Operstate: linkmode=1, operstate=5 > > Own MAC address: 00:19:7e:8c:05:b0 > > wpa_driver_wext_set_wpa > > wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0 > > wpa_driver_wext_set_countermeasures > > wpa_driver_wext_set_drop_unencrypted > > Setting scan request: 1 sec 100000 usec > > Added interface eth1 > > RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () > > Wireless event: cmd=0x8b06 len=8 > > RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () > > Wireless event: cmd=0x8b1a len=8 > > RTM_NEWLINK: operstate=0 ifi_flags=0x1002 () > > Wireless event: cmd=0x8b2a len=8 > > l2_packet_receive - recvfrom: Network is down > > Setting scan request: 0 sec 0 usec > > State: DISCONNECTED -> SCANNING > > Starting AP scan (broadcast SSID) > > Trying to get current scan results first without requesting a new scan > > to speed up initial association > > Received 0 bytes of scan results (0 BSSes) > > Scan results: 0 > > No suitable AP found. > > Setting scan request: 0 sec 0 usec > > No enabled networks - do not scan > > State: SCANNING -> INACTIVE > > Received 0 bytes of scan results (0 BSSes) > > Scan results: 0 > > Ignore event for foreign ifindex 2 > > ---------------- > > > > #NetworkManager --no-daemon > > > > NetworkManager: <info> starting... > > NetworkManager: <info> eth0: Device is fully-supported using driver 'sky2'. > > NetworkManager: <info> (eth0): exporting device as > > /org/freedesktop/NetworkManager/Device/2 > > NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'. > > NetworkManager: <info> Bringing down device eth0 > > NetworkManager: <info> Bringing up device eth0 > > NetworkManager: <info> Deactivating device eth0. > > NetworkManager: <info> eth1: Device is fully-supported using driver > > 'bcm43xx'. > > NetworkManager: <info> (eth1): exporting device as > > /org/freedesktop/NetworkManager/Device/3 > > NetworkManager: <info> Now managing wireless (802.11) device 'eth1'. > > NetworkManager: <info> Bringing down device eth1 > > NetworkManager: <info> Bringing up device eth1 > > NetworkManager: <info> Deactivating device eth1. > > NetworkManager: <info> (eth0) supplicant interface is now in state 2 (from > > 1). > > NetworkManager: <info> (eth1) supplicant interface is now in state 2 (from > > 1). > > ----------------- > > > > > > Then the NetworkManager hang on here. > > Is there any advise for me to solve this? thank you a lot! > > should I run nm-applet by myself? > > i ever tried to run nm-applet by myself but still doesn't work and > > shown the following message: > > > > NetworkManager: <info> starting... > > NetworkManager: <info> eth0: Device is fully-supported using driver 'sky2'. > > NetworkManager: <info> (eth0): exporting device as > > /org/freedesktop/NetworkManager/Device/2 > > NetworkManager: <info> Now managing wired Ethernet (802.3) device 'eth0'. > > NetworkManager: <info> Bringing up device eth0 > > NetworkManager: <info> Deactivating device eth0. > > NetworkManager: <info> eth1: Device is fully-supported using driver > > 'bcm43xx'. > > NetworkManager: <info> (eth1): exporting device as > > /org/freedesktop/NetworkManager/Device/3 > > NetworkManager: <info> Now managing wireless (802.11) device 'eth1'. > > NetworkManager: <info> Bringing up device eth1 > > NetworkManager: <info> Deactivating device eth1. > > NetworkManager: <info> (eth0) supplicant interface is now in state 2 (from > > 1). > > NetworkManager: <info> (eth1) supplicant interface is now in state 2 (from > > 1). > > NetworkManager: <info> SWITCH: no current connection, found better > > connection 'Auto Ethernet (eth0)'. > > NetworkManager: <info> Activating device eth0 > > NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device > > Prepare) scheduled... > > NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device > > Prepare) started... > > NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device > > Configure) scheduled... > > NetworkManager: <info> Activation (eth0) Stage 1 of 5 (Device > > Prepare) complete. > > NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device > > Configure) starting... > > NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device > > Configure) successful. > > NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure > > Start) scheduled. > > NetworkManager: <info> Activation (eth0) Stage 2 of 5 (Device > > Configure) complete. > > NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure > > Start) started... > > NetworkManager: <info> Activation (eth0) Beginning DHCP transaction. > > Internet Systems Consortium DHCP Client V3.0.5 > > Copyright 2004-2006 Internet Systems Consortium. > > All rights reserved. > > For info, please visit http://www.isc.org/sw/dhcp/ > > > > NetworkManager: <info> dhclient started with pid 17573 > > NetworkManager: <info> Activation (eth0) Stage 3 of 5 (IP Configure > > Start) complete. > > Error: Could not acquire the NM DHCP client service. Message: > > (org.freedesktop.DBus.Error.AccessDenied) Connection ":1.41" is not > > allowed to own the service "org.freedesktop.nm_dhcp_client" due to > > security policies in the configuration file > > Listening on LPF/eth0/00:16:d3:5b:d2:ae > > Sending on LPF/eth0/00:16:d3:5b:d2:ae > > Sending on Socket/fallback > > DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 > > DHCPOFFER from 10.36.251.1 > > DHCPREQUEST on eth0 to 255.255.255.255 port 67 > > DHCPACK from 10.36.251.1 > > Error: Could not acquire the NM DHCP client service. Message: > > (org.freedesktop.DBus.Error.AccessDenied) Connection ":1.42" is not > > allowed to own the service "org.freedesktop.nm_dhcp_client" due to > > security policies in the configuration file > > bound to 10.36.253.137 -- renewal in 128334 seconds. > > ----------- > > > > here is my device info: > > wpa_supplicant v0.5.8 > > > > NetworkManager Tool > > > > State: disconnected > > > > - Device: eth0 > > ---------------------------------------------------------------- > > Type: Wired > > Driver: sky2 > > Active: no > > HW Address: XX:XX:XX:XX:XX:XX > > > > Capabilities: > > Supported: yes > > Carrier Detect: yes > > Speed: 100 Mb/s > > > > Wired Settings > > > > > > - Device: eth1 > > ---------------------------------------------------------------- > > Type: 802.11 Wireless > > Driver: bcm43xx > > Active: no > > HW Address: XX:XX:XX:XX:XX:XX > > > > Capabilities: > > Supported: yes > > > > Wireless Settings > > WEP Encryption: yes > > WPA Encryption: yes > > WPA2 Encryption: yes > > > > thank you for your help > > > > Richard Chang. > > _______________________________________________ > > NetworkManager-list mailing list > > [email protected] > > http://mail.gnome.org/mailman/listinfo/networkmanager-list > > _______________________________________________ NetworkManager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
