Hello Dan, I took some time to try what you asked me.
Just to sum up. I use NetworkManager 7 to connect my GSM dongle. When I launch NetworkManager nm-system-settings and modem-manager I got those messages when I plug my device : *** Message: (ttyUSB1) opening serial device... NetworkManager: <info> (ttyUSB1): ignoring due to lack of mobile broadband capabilties ** (modem-manager:920): DEBUG: (ttyUSB1): probe requested by plugin 'Generic' ** (modem-manager:920): DEBUG: (ttyUSB1): --> 'AT+GCAP<CR>' ** (modem-manager:920): DEBUG: (ttyUSB1): <-- 'AT+GCAP<CR><LF>^BOOT:35596450,0,0,0,31<CR><LF><CR><CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>' ** Message: (ttyUSB1) closing serial device... ** Message: Modem creation best plugin : Generic subsys : tty name : ttyUSB1 ** Message: devfile hand made /sys/devices/platform/ehci-omap.0/usb1/1-1/1-1:1.0/tty/ttyUSB0 ** Message: sysfs_path /sys/devices/platform/ehci-omap.0/usb1/1-1 ** Message: (Generic): GSM modem /sys/devices/platform/ehci-omap.0/usb1/1-1 claimed port ttyUSB1 ** (modem-manager:920): DEBUG: Added modem /sys/devices/platform/ehci-omap.0/usb1/1-1 ** (modem-manager:920): DEBUG: Exported modem /sys/devices/platform/ehci-omap.0/usb1/1-1 as /org/freedesktop/ModemManager/Modems/0 ** Message: (ttyUSB0) opening serial device... NetworkManager: <info> (ttyUSB0): found serial port (udev: hal:GSM) NetworkManager: <info> (ttyUSB0): ignoring due to lack of probed mobile broadband capabilties ** (modem-manager:920): DEBUG: (ttyUSB0): probe requested by plugin 'Generic' ** (modem-manager:920): DEBUG: (ttyUSB0): --> 'AT+GCAP<CR>' ** (modem-manager:920): DEBUG: (ttyUSB0): <-- 'AT+GCAP<CR><CR><LF>+GCAP: +CGSM,+FCLASS,+DS<CR><LF><CR><LF>OK<CR><LF>' ** Message: (ttyUSB0) closing serial device... ** Message: Modem creation best plugin : Generic subsys : tty name : ttyUSB0 ** Message: devfile hand made /sys/devices/platform/ehci-omap.0/usb1/1-1/1-1:1.0/tty/ttyUSB0 ** Message: sysfs_path /sys/devices/platform/ehci-omap.0/usb1/1-1 ** Message: (Generic): GSM modem /sys/devices/platform/ehci-omap.0/usb1/1-1 claimed port ttyUSB0* I changed the lines as you asked me too and there are the logs : *r...@igep:~# cat /tmp/probe.log **** Started: Sat Jan 1 00:02:17 2000 L: (946684937.825225) main(): (/dev/.tmp-char-188:1): usb-vid 0x12d1 usb-pid 0x1003 usb-intf 1 driver 'option' L: (946684937.825347) main(): (/dev/.tmp-char-188:1) ignoring Huawei USB interface #1 **** Started: Sat Jan 1 00:02:17 2000 L: (946684937.763397) main(): (/dev/.tmp-char-188:0): usb-vid 0x12d1 usb-pid 0x1003 usb-intf 0 driver 'option' L: (946684937.763580) main(): waiting 1000 ms before probing L: (946684938.763946) main(): probing /dev/.tmp-char-188:0 ': (946684939.270904) modem_send_command(): Sending: 'AT+GCAP L: (946684939.278442) modem_wait_reply(): Got: 'AT+GC' L: (946684939.279968) modem_wait_reply(): Got: 'AT+GCA' ': (946684939.281310) modem_wait_reply(): Got: 'AT+GCAP L: (946684939.282653) modem_wait_reply(): Got: 'AT+GCAP +GCAP: +CGSM,+FCLASS,+DS OK ' L: (946684939.282745) modem_probe_caps(): GCAP response: +GCAP: +CGSM,+FCLASS,+DS L: (946684939.285674) main(): /dev/.tmp-char-188:0: caps (0x29) GSM time: 521ms* I don't see any problem there. When I use the nm-tool command no device is seen. I got it working modifying the LIB_UDEV flag. But it only works when I plug my device when the board has done all its init. So if I let it plugged at boot it is not recognized and I can use it. Thanks for your input !
_______________________________________________ NetworkManager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
