Thank for this answer ! It is really helpful. I tried the lshal at boot and no device is seen ... I assume that is the problem ! But now I don't know what to do to get hal to recognize the dongle at boot. I don't get any print from udev at boot it must be a redirection to /dev/null/ but nm-modem-probe is for sure called with good informations I managed to display them.
Concerning prints at boot I got that : *[ 20.445983] usb 1-1: new high speed USB device using ehci-omap and address 3 [ 20.624420] usb 1-1: configuration #1 chosen from 1 choice [ 20.651214] usb-storage: probe of 1-1:1.0 failed with error -5 [ 20.702789] usb-storage: probe of 1-1:1.1 failed with error -5 [ 20.766571] [ 20.766571] usb_stor_huawei_e220_init [ 20.772644] usb-storage: probe of 1-1:1.2 failed with error -1 [ 20.804779] [ 20.804779] usb_stor_huawei_e220_init [ 20.810913] usb-storage: probe of 1-1:1.3 failed with error -1 [ 20.817810] usb 1-1: New USB device found, idVendor=12d1, idProduct=1003 [ 20.824676] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 20.831909] usb 1-1: Product: HUAWEI Mobile [ 20.836120] usb 1-1: Manufacturer: HUAWEI Technology* Do you think that nm-modem-probe doesn't recognize the device I tried the command from the udev rule after booting with the dongle plugged before boot : */lib/udev# nm-modem-probe --vid 0x12d1 --pid 0x1003 --usb-interface 00 01 --driver option --delay 1000 --timeout 5000 --export --verbose --log /tmp/probe.log L: (946685003.877166) main(): (01): usb-vid 0x12d1 usb-pid 0x1003 usb-intf 0 driver 'option' L: (946685003.877380) main(): waiting 1000 ms before probing L: (946685004.877807) main(): probing 01 E: (946685009.983703) open(01) failed: 2* Does that speak to you ? the error at opening means it doesn't see it either ? The more I try to understand things the more I get lost TT PS: by the way I like your blog dan :)
_______________________________________________ NetworkManager-list mailing list [email protected] http://mail.gnome.org/mailman/listinfo/networkmanager-list
