RE: [newbie] Slow read performance.

[Anonymous]

        >>This is a routeing problem most likely try inserting a route to
the
        >>host(not enough info for more sorry)

        Thanks for responding!     Routing problem eh?      Do you mean
inserting a route on the Windows PC in the lmhosts file?     If you are
talking about Linux, where would one insert the route?     Here is the
configuration of the network.

        Server          ETH0:   IP: <x.x.x.198>   sub net: 255.255.255.192
                                        gateway: <x.x.x.193>  dns: x.x.x.15


                        ETH1:   IP: 192.168.1.1  sub net: 255.255.255.0

        WinPC           IP:                     192.168.1.2             
                                Sub net:        255.255.255.0
                                gateway:        192.168.1.1
                                DNS:            x.x.x.15

        The NICs I am using are the Realtec PCI using the NE2K-PCI module.
I have taken the cards out and installed a 3Com Etherlink III with the same
results.

        Thanks again!