From: Rich McCabe <[EMAIL PROTECTED]>
> The eth0 card is configured as 192.168.1.1 with a netmask of
255.255.255.0
OK, it sounds like your router is configured to be on a different
network. Assuming that your eth0 card is the one that's connected to
the router, set its IP to 10.0.0.x, where 2=<x=<254. Do likewise with
all other machines on the network. Alternatively, you might try
enabling dhcp on the linux box (and the other machines).
> default gateway____________
> default gateway device__________
10.0.0.1 for both, I believe.
> And then if I click add I get
>
> Device_________________
> Network_______________
> Netmask_______________
> Gateway_______________
You wouldn't need to add another network interface, AFAIK.
> I have tried to ping the router at 10.0.0.1 and 2 and cant get a
response.
The router is at .1; 10.0.0.2 seems to be your Win box. My guess is
that your Linux box doesn't know how to route to 10.0.0.1, which is why
it doesn't get a response.
I'm not sure, though, why you have two NICs in the Linux box. With
this setup (using a separate router), you shouldn't need a second one.
