Okay, I got a Logitech 3000 webcam now and I'd like to use it. :-)
USBview shows it, as soons as I plug it in. Its listed in
/proc/bus/usb/devices. KDE Center shows it in info, and here is my loaded
modules:
Module Size Used by Tainted: P
c-qcam 8056 0 (unused)
parport 23936 0 [c-qcam]
floppy 49340 0
sr_mod 15096 0 (autoclean)
sg 31276 0 (autoclean)
pwc 41416 0 (unused)
ppp_deflate 41024 0 (autoclean)
bsd_comp 4344 0 (autoclean)
agpgart 31840 3 (autoclean)
joydev 5632 0
adi 6232 0 (unused)
gameport 1660 0 [adi]
snd-seq-midi 3680 0 (autoclean) (unused)
snd-opl3-synth 9860 0 (autoclean) (unused)
snd-seq-instr 4816 0 (autoclean) [snd-opl3-synth]
snd-seq-midi-emul 4880 0 (autoclean) [snd-opl3-synth]
snd-ainstr-fm 1780 0 (autoclean) [snd-opl3-synth]
snd-seq-oss 26176 0 (unused)
snd-seq-midi-event 3208 0 [snd-seq-midi snd-seq-oss]
snd-seq 33264 2 [snd-seq-midi snd-opl3-synth snd-seq-instr
snd-seq-midi-emul snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 36932 0
snd-mixer-oss 9016 0 [snd-pcm-oss]
snd-cmipci 15660 0
snd-pcm 55808 0 [snd-pcm-oss snd-cmipci]
snd-mpu401-uart 2752 0 [snd-cmipci]
snd-rawmidi 12864 0 [snd-seq-midi snd-mpu401-uart]
snd-opl3-lib 5764 0 [snd-opl3-synth snd-cmipci]
snd-timer 9964 0 [snd-seq snd-pcm snd-opl3-lib]
snd-seq-device 3836 0 [snd-seq-midi snd-opl3-synth snd-seq-oss
snd-seq snd-rawmidi snd-opl3-lib]
snd-hwdep 3840 0 [snd-opl3-lib]
snd 24804 0 [snd-seq-midi snd-opl3-synth snd-seq-instr
snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-cmipci
snd-pcm snd-mpu401-uart snd-rawmidi snd-opl3-lib snd-timer snd-seq-device
snd-hwdep]
nfsd 66576 8 (autoclean)
lockd 46480 1 (autoclean) [nfsd]
sunrpc 60188 1 (autoclean) [nfsd lockd]
ppp_async 7456 1
ppp_generic 20064 3 [ppp_deflate bsd_comp ppp_async]
slhc 5072 1 [ppp_generic]
af_packet 13000 0 (autoclean)
tulip 40800 1 (autoclean)
iforce 9832 0 (unused)
serio 1132 0 [iforce]
keybdev 1920 0 (unused)
mousedev 4116 1
hid 18340 0 (unused)
printer 6944 0
usbmouse 2004 0 (unused)
input 3456 0 [joydev adi iforce keybdev mousedev hid
usbmouse]
ide-cd 28712 0
cdrom 26848 0 [sr_mod ide-cd]
tuner 9536 1 (autoclean)
tvaudio 12156 0 (autoclean) (unused)
msp3400 15148 1 (autoclean)
bttv 66880 0
i2c-algo-bit 7432 1 [bttv]
i2c-core 15332 0 [tuner tvaudio msp3400 bttv i2c-algo-bit]
soundcore 3780 0 [snd bttv]
videodev 5792 4 [c-qcam pwc bttv]
ide-scsi 8212 0
NVdriver 1065920 10
usb-uhci 21676 0 (unused)
usbcore 58304 1 [pwc iforce hid printer usbmouse usb-uhci]
rtc 6560 0 (autoclean)
reiserfs 169776 4
sd_mod 11612 0 (unused)
aic7xxx 120604 0
scsi_mod 91140 5 [sr_mod sg ide-scsi sd_mod aic7xxx]
It looks like the modules that are needed are there:
bttv
cqcam
pwc
usb
However, when I try "gqcam" it says, "/dev/video is a directory". So...I
renamed it to /dev/video.old and linked /dev/video0 and /dev/video. Gqcam
then actually runs, but no picture. If I try to pick a diff. video from the
drop down menu - it locks up.
Anyone got the Logitech 3000 actually working? If so, how 'bout sending me
some tip/sources (I've already done googlized it, and been to several web
sites as well as searching the archives).
Thanks in advance! :-)
--
/\
Dark< >Lord
\/
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
