On Thursday 26 August 2004 05:58 pm, Hoyt Bailey wrote:

Snip
Thanks Hoyt,  I'm still a little confused.  By reading your partitions you 
have one large hard drive.  I have Three (3) and one is working great.
> > Here is what I have then I will ask for advice / help.
> > My new hard drive has   /   swap and   /home on it.
Snip
Did you use DiskDrake to partition your hard drive??  The options /backup 
and /music are not in my options OR can I call them anything I want and 
assign them to /part 1 thru 12 as needed ??? 
> > My question is:  If I go into Mount Points and go to each hard drive
> > and choose the partition size and define it what should they be ?
 /var ??  another /home ? ?..... just what I'm not sure.  I have all this
 space and it's not showing up usable.
Snip
   ? ?  Do I need a swap on all three drives ? ?
> >
> > I have gone thru all my books and the net and nothing really talks
> > about multiple hard drives.
There is really nothing out there for multiple hard drives.
Snip
> > I'm really confused now on what to do.
> > Thanks for all your help in advance,
> > bj
Snip
This is helpful .  Do you have just one large hard drive ?
> >  Alter it to your needs:
> Filesystem            Size  Used Avail Use% Mounted on
> /dev/ide/host0/bus0/target0/lun0/part6
>                       2.9G  123M  2.7G   5% /
> /dev/ide/host0/bus0/target0/lun0/part12
>                        18G  4.7G   12G  28% /backup
> /dev/ide/host0/bus0/target0/lun0/part1
>                        66M   11M   53M  17% /boot
> /dev/ide/host0/bus0/target0/lun0/part7
>                        20G  3.6G   15G  20% /home
> /dev/ide/host0/bus0/target0/lun0/part10
>                        34G   26G  5.9G  82% /music
> /dev/ide/host0/bus0/target0/lun0/part8
>                       7.7G  406M  7.0G   6% /tmp
> /dev/ide/host0/bus0/target0/lun0/part9
>                        20G  5.9G   13G  33% /usr
> /dev/ide/host0/bus0/target0/lun0/part11
>                       9.5G  207M  8.8G   3% /var
> I have installed everything that looked interesting so in my case
> reseting the part's to used would be sufficient.
Thanks again.
Sorry .... Still confused
bj


____________________________________________________
Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
____________________________________________________

Reply via email to