On Thursday 26 August 2004 05:58 pm, Hoyt Bailey wrote:
SNIP
Thanks Hoyt but I'm still a little confused.  From your response you have one 
large hard drive ( I think that is what I see ).

I have three large hard drives - I is perfect and the other two well not sure.

 My question is:  If I go into Mount Points and go to each hard drive
 and choose the partition size and define it what should they be ?
 /var another /home ..... just what I'm not sure.  I have all this
 space and it's not showing up usable.

Do I need a swap file on all three hard drives?
> > Also do I need a swap on all three drives?
> >
> > I have gone thru all my books and the net and nothing really talks
> > about multiple hard drives.
> >
> > I'm really confused now on what to do.
> > Thanks for all your help in advance,
> > bj
SNIP
Hoyt,
Are you using the DiskDrake tool to do this?  The reason I'm askin is 
that /music is not an option neither is /backup.
I'm not sure of you mount scheme either.
Can you call a partition anything you want and assign it to part 1 thru 12 ?
> I went through this exercise a while ago and got a lot of suggestions
> from which I developed a scheme.  It proved to be somewhat too generous
> and if I had to do it again I would set things closer to the used col.
> I am not going to give any advice but will because I am sending you my
> df.  Alter it to your needs:
> Filesystem            Size  Used Avail Use% Mounted on
> /dev/ide/host0/bus0/target0/lun0/part6
>                       2.9G  123M  2.7G   5% /
> /dev/ide/host0/bus0/target0/lun0/part12
>                        18G  4.7G   12G  28% /backup
> /dev/ide/host0/bus0/target0/lun0/part1
>                        66M   11M   53M  17% /boot
> /dev/ide/host0/bus0/target0/lun0/part7
>                        20G  3.6G   15G  20% /home
> /dev/ide/host0/bus0/target0/lun0/part10
>                        34G   26G  5.9G  82% /music
> /dev/ide/host0/bus0/target0/lun0/part8
>                       7.7G  406M  7.0G   6% /tmp
> /dev/ide/host0/bus0/target0/lun0/part9
>                        20G  5.9G   13G  33% /usr
> /dev/ide/host0/bus0/target0/lun0/part11
>                       9.5G  207M  8.8G   3% /var
> I have installed everything that looked interesting so in my case
> reseting the part's to used would be sufficient.



____________________________________________________
Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
____________________________________________________

Reply via email to