Wade
Since Linux is not seeing a Communication controller I am afraid that
what you may have is a Winmodem. If it is a hardware based modem then I am
afraid you have me stumped.
Good luck
Charles
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, May 05, 2000 9:48 PM
Subject: Re: [newbie] modem/internet connection/cdrom2
> Hi Charles,
>
> I read all of that and thank you for sending it, what I found was what I
> think may be a little unusual?
>
> When I did
> cat /proc/pci
> as root I got the following;
>
> Bus 0, device 9, function 0:
> Multimedia Audio controller:
> Unknown Vendor Unknown device (rev 254)
> Vendor id=12eb. device id=2.
> Medium devsel. Fast back-to-back capable. IRQ 12.
> Master Capable. Latency=32. Min Gnt=4. Max Lat=12.
> Non-prefetchable 32 bit memory at 0xde800000 [0xde800000].
> I/O at 0xb000 [0xb001]
> I/O at 0xa800 [0xa801]
>
> followed by;
>
> Bus 0, device 11, function 0:
> Serial controller: Unknown vendor Unknown device (rev1)
> vendor id=127a. device id=1005.
> medium devsel. Fast back-to-back capable. IRQ 10.
> Master Capable. Latency=32.
> Non-prefetchable 32 bit memory at 0xde000000 [0xde000000]
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> with no - I/O
>
> I am not certain which of the following are my modem, it almost appears
> that neither are. I almost get the feeling that it is
> 'device 11' which also appears to be somewhat undefined?
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> when I did;
> setserial /dev/ttyS3 port 0xb000 spd_vhi skip_test auto_irq autoconfig
> as per 'device 9' above
> I get;
> Cannot set serial info: Device or resource busy
>
> Sounds like what kppp says?
>
> Thanks for all of your help,
>
> b/web
> Wade
>
>
> At 08:24 AM 5/5/00 -0400, you wrote:
> >Wade
> >Sorry about the attachment.
> >Try this link http://www.actiontec.com/support/modems/cwifaq.html
> >
> >Charles
> >----- Original Message -----
> >From: <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Sent: Thursday, May 04, 2000 10:08 PM
> >Subject: Re: [newbie] modem/internet connection/cdrom2
> >
> >
> >> Hi Charles,
> >>
> >> Thanks, and yes my modem is a PCI so back to ttyS3. I would like to
read
> >> your attachmment but was not able to open that mime type?
> >>
> >> b/web
> >> Wade
> >>
> >>
> >> At 09:04 AM 5/4/00 -0400, you wrote:
> >> > Wade what interface is your modem? If it is a PCI modem you have
to
> >set
> >> >it up as ttyS3. Charles Attachment Converted:
> >> >"c:\tscnet\eudora\attach\smime15.p7s"
> >>
> >>
> >
> >
> >
>
>
