OK, then we are going to need more information. What exactly does "can't
configure" mean? What have you tried so far? If you have a working Win98
install, how is the card configured there? Any messages about the adapter
in the log? This card works fine for me and is supported using the RTL8139
driver.
- Ralph
----- Original Message -----
From: "A J Benamu" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Friday, July 07, 2000 11:49 PM
Subject: RE: [newbie] Ethernet problems.
> I did what you said and still no ethernet card working..
>
> Any ideas?
>
> Thanks,
>
> AJ
>
> -----Original Message-----
> From: Ralph Day [mailto:[EMAIL PROTECTED]]
> Sent: Friday, July 07, 2000 11:51 PM
> To: [EMAIL PROTECTED]
> Subject: Re: [newbie] Ethernet problems.
>
>
> On my HP with the same NIC card LM recognized the card but I couldn't get
it
> to work. I had to go into the BIOS setup and change the OS from Windows
to
> Other (the same as PNP OS no in other BIOS) to solve the problem. The
> problem was that the IRQ for the card wasn't getting automacally assigned
by
> the BIOS and LM wasn't configuring the card either. Changing the setting
> makes the BIOS assign an IRQ.
>
> - Ralph
>
> ----- Original Message -----
> From: "A J Benamu" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, July 07, 2000 7:01 PM
> Subject: [newbie] Ethernet problems.
>
>
> >
> > Hi,
> >
> > I hope I can get my message across...
> > I installed Linux Mandrake 7.0 in my Athlon 700 machine.. Also using Win
> 98.
> >
> > I can't seem to configure my ethernet card. I use cable modem to access
> the
> > internet.
> >
> > The ethernet card is HP EN1207D-TX PCI 10/100 Fast Ethernet Adapter.
> >
> > Can anybody help me?
> >
> > Why can't I configure my HP M90 with Mandrake?
> >
> > Thanks,
> >
> > AJ
