Cool. Congrats and enjoy.
Dacia
--- A J Benamu <[EMAIL PROTECTED]> wrote:
> Hi guys,
>
> I am up and running.. Internet is ok.... THANKS A
> LOT...
>
> AJ
>
> -----Original Message-----
> From: Dacia and AzureRose
> [mailto:[EMAIL PROTECTED]]
> Sent: Saturday, July 08, 2000 7:32 PM
> To: [EMAIL PROTECTED]
> Subject: RE: [newbie] Ethernet problems.
>
>
> WAIT!
>
> I have @home and I just got this configured in linux
> last night. On the receipt that they installation
> person left are your DNS addresses, IP address,
> subnet
> mask and gateway address. If you don't have that
> piece of paper or can't make sense of it, call @
> home
> and ask them for that info.
>
> Open the network utility in DrakConf. Enter your
> computer name with the name @home gave you like
> this:
>
> c652933-a.sttln1.wa.home.com
>
> where the above reflects the information they gave
> you. Choose manual in the configuration for eth0
> and
> enter the IP address and subnet mask there. Go to
> the
> DNS section and enter your primary and secondary DNS
> addresses. Go to the gateway section and enter your
> gateway address. Quit until it wants to apply the
> changes. Let it do that. You should be able to
> access the internet immediately.
>
>
> Dacia
>
> --- A J Benamu <[EMAIL PROTECTED]> wrote:
> > Roman,
> >
> > No luck there.. I think I will give up on Linux
> and
> > the Internet.. It is
> > definitely easier with Windows... MUCH EASIER!!!!!
> >
> > AJ
> >
> > -----Original Message-----
> > From: Romanator [mailto:[EMAIL PROTECTED]]
> > Sent: Saturday, July 08, 2000 6:23 PM
> > To: [EMAIL PROTECTED]
> > Cc: A J Benamu
> > Subject: Re: [newbie] Ethernet problems.
> >
> >
> > Hi AJ,
> >
> > I have attached a link to a url that will get you
> up
> > and running. I'm an
> > @Home cable user and I had one heck of a time
> > getting logged on. After
> > reading this, everything was working okay.
> >
> >
>
http://members.home.net/randal.leavitt/CableModemConnectionNotes.html
> >
> > Good Luck!
> >
> > Roman
> >
> >
> > A J Benamu wrote:
> > >
> > > HI Ralph,
> > >
> > > I finally got my HP Ethernet card configured..
> but
> > I still don't have
> > > internet..
> > > Does anybody know how to configure the @Home
> > service (Cable Modem).
> > >
> > > Thanks,
> > >
> > > AJ
> > >
> > > -----Original Message-----
> > > From: Ralph Day [mailto:[EMAIL PROTECTED]]
> > > Sent: Saturday, July 08, 2000 8:59 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: Re: [newbie] Ethernet problems.
> > >
> > > OK, then we are going to need more information.
> > What exactly does "can't
> > > configure" mean? What have you tried so far?
> If
> > you have a working Win98
> > > install, how is the card configured there? Any
> > messages about the adapter
> > > in the log? This card works fine for me and is
> > supported using the
> > RTL8139
> > > driver.
> > >
> > > - Ralph
> > >
> > > ----- Original Message -----
> > > From: "A J Benamu" <[EMAIL PROTECTED]>
> > > To: <[EMAIL PROTECTED]>
> > > Sent: Friday, July 07, 2000 11:49 PM
> > > Subject: RE: [newbie] Ethernet problems.
> > >
> > > > I did what you said and still no ethernet card
> > working..
> > > >
> > > > Any ideas?
> > > >
> > > > Thanks,
> > > >
> > > > AJ
> > > >
> > > > -----Original Message-----
> > > > From: Ralph Day [mailto:[EMAIL PROTECTED]]
> > > > Sent: Friday, July 07, 2000 11:51 PM
> > > > To: [EMAIL PROTECTED]
> > > > Subject: Re: [newbie] Ethernet problems.
> > > >
> > > >
> > > > On my HP with the same NIC card LM recognized
> > the card but I couldn't
> > get
> > > it
> > > > to work. I had to go into the BIOS setup and
> > change the OS from Windows
> > > to
> > > > Other (the same as PNP OS no in other BIOS) to
> > solve the problem. The
> > > > problem was that the IRQ for the card wasn't
> > getting automacally
> > assigned
> > > by
> > > > the BIOS and LM wasn't configuring the card
> > either. Changing the
> > setting
> > > > makes the BIOS assign an IRQ.
> > > >
> > > > - Ralph
> > > >
> > > > ----- Original Message -----
> > > > From: "A J Benamu" <[EMAIL PROTECTED]>
> > > > To: <[EMAIL PROTECTED]>
> > > > Sent: Friday, July 07, 2000 7:01 PM
> > > > Subject: [newbie] Ethernet problems.
> > > >
> > > >
> > > > >
> > > > > Hi,
> > > > >
> > > > > I hope I can get my message across...
> > > > > I installed Linux Mandrake 7.0 in my Athlon
> > 700 machine.. Also using
> > Win
> > > > 98.
> > > > >
> > > > > I can't seem to configure my ethernet card.
> I
> > use cable modem to
> > access
> > > > the
> > > > > internet.
> > > > >
> > > > > The ethernet card is HP EN1207D-TX PCI
> 10/100
> > Fast Ethernet Adapter.
> > > > >
> > > > > Can anybody help me?
> > > > >
> > > > > Why can't I configure my HP M90 with
> Mandrake?
> > > > >
> > > > > Thanks,
> > > > >
> > > > > AJ
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Get Yahoo! Mail � Free email you can access from
> anywhere!
> http://mail.yahoo.com/
>
>
__________________________________________________
Do You Yahoo!?
Get Yahoo! Mail � Free email you can access from anywhere!
http://mail.yahoo.com/
