Replace the line
print command = lpr-cups -P 0
by
print command = lpr-cups -P 0 -r -o raw
Till
Fireman71 wrote:
>
> Trying to set up a box running LM7.2 as a print server for a couple of win98
> machines.
>
> Currently i have samba set up correctly as far as i can tell. All the
> machines can see each other and talk to each other fine. On the windows
> machines i can open up network neighborhood and see the linux box. Open up
> the linux box and i can see the shared files and read and write to them
> perfectly. Now the problem...
>
> I see two printers, one named "lp" and the other named "printers" but there
> is only one printer attached to the linux box. A HP DeskJet 722c. Under
> LM7.1 without CUPS i only saw one printer and just set up the windows
> machines to print to it and all was good in the world.
>
> Now i have tried to print to both of the printers that samba is showing and
> havent been able to get anything to come out of the printer but i am fairly
> certain that the print jobs are being sent to the linux box. Reasons i think
> this are that all the network lights blink like they did when a print job
> was being sent under 7.1 and tcpdump is showing that the linux box is
> receiving packets from the win98 box that is sending the job.
>
> So i am fairly certain that windows is sending out the print job and that
> the linux box is receiving it but nothing is getting printed. Any one have
> any ideas about what i need to do to solve this one?
>
> Thanks in advance,
> Ian K. Harrell
> [EMAIL PROTECTED]
>
> PS -- Here is my smb.conf file just in case it helps. I didnt configure it
> manually but used swat to generate it.
>
> # Samba config file created using SWAT
> # from localhost.localdomain (127.0.0.1)
> # Date: 2001/02/03 02:23:33
>
> # Global parameters
> [global]
> workgroup = MYGROUP
> netbios name = HP1
> server string = Samba Server %v
> interfaces = eth0
> encrypt passwords = Yes
> update encrypted = Yes
> log file = /var/log/samba/log.%m
> max log size = 50
> socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192
> printcap name = lpstat
> dns proxy = No
> printing = cups
> print command = /usr/bin/lp -d0 -oraw ; rm
> lpq command = /usr/bin/lpstat -o0
> lprm command = /usr/bin/cancel 0-%j
> queuepause command = /usr/bin/disable 0
> queueresume command = /usr/bin/enable 0
>
> [homes]
> comment = Home Directories
> writeable = Yes
> browseable = No
>
> [printers]
> comment = All Printers
> path = /var/spool/samba
> create mask = 0700
> guest ok = Yes
> printable = Yes
> print command = lpr-cups -P 0 # using cups own drivers (use generic
> PostScript on clients).
> lpq command = lpstat -o 0
> lprm command = cancel 0-%j
>
> [lp]
> path = /var/spool/samba
> writeable = Yes
> create mask = 0700
> guest ok = Yes
> printable = Yes
> print command = lpr-cups -P 0 # using cups own drivers (use generic
> PostScript on clients).
> lpq command = lpstat -o 0
> lprm command = cancel 0-%j
> printer = lp
> oplocks = No
> share modes = No
