Yup - I knew about find files, but I needed the right file name - I guess
maybe dmesg is what you meant, not dmseg. Assuming that to be correct, here
are the files from both the server and a client machine.
I don't believe I am piggy-backing by the way - it was my question you
originally responded to regarding the 10 seconds plus loads of local files.
To be clear on the network setup - 192.168.0.1 is the server which runs DHCP
and hosts the ppp dialup. Everyone else is set to get addresses via DHCP.
These are all on a fast ethernet LAN.
dmesg in the client machine has a lot of:
"clm-6006: writing inode 52808 on readonly FS"
messages. That doesn't look healthy does it?
Also noticed after having switched off booting into X, that startx pauses for
a while then says "Host name lookup failure".
Anyway dmesg files are attached.
thanks again for all the help.
Brian
On Tuesday 18 December 2001 6:09 am, you wrote:
> to locate a file on your computer, there are a few good utilities, the one
> I use in KDE is found at K(menu bar bottom left corner, like "start" in M$
> prod.) > Applications > file tools > find files.
> dmesg is the log of the boot up messages that you see if you use a text
> boot up. /var/log/dmseg is mine, you will need to be root to access it.
>
> It appears to me that you are "piggybacking" on someone else's problem, as
> the original I was answering had to do with the desktop of the Mandrake
> Machine, and slow (10 to fifteen seconds) to load a locally stored file. if
> the problem you are having is with multiple computers connected to a single
> dial up Internet connection, and it seems the graphics load quicker after a
> while and you are running Squid, that is "normal" as the cache in Squid is
> filling with the graphics that repeat and are now stored local. are we
> referring to a local (on that machine) stored files or files over the net?
>
> if your network is "of the 192.168.0.1 variety" does that mena the computer
> that is connected to the dial up the dhcp server?
>
> On Monday 17 December 2001 07:21, you wrote:
> > Now you're just trying to make me look greener right? :-)
> >
> > Where would I find a dmseg file? ...is this on the server, the client,
> > or both?
> >
> > ypbind is not running. My network is of the 192.168.0.1 variety with a
> > shared ppp dialup. The slowess occurs on the clients, although of course
> > that could be a result of the server being slow to get things happening.
> >
> > Right now, with the server having been up all day and squid running on
> > it, a fresh boot of a client works like a charm. So either starting
> > squid has made a difference, or something on the server eventually stops
> > getting in the way.
> >
> > Brian
> >
> > On Monday 17 December 2001 11:00 pm, you wrote:
> > > post the output of your dmseg file, do you have ypbind running? do you
> > > have a local network? is this box the dhcp server or a client?
> > >
> > > On Sunday 16 December 2001 23:20, you wrote:
> > > > Thanks for the responses to this. I don't think that there are any
> > > > extra servers running. One thing that may be related is that if I
> > > > run linuxconf and quit, it complains that squid isn't running and
> > > > will start it if I let it do so. Could this be implicated? I notice
> > > > that during the shutdown, I get error messages telling me it failed
> > > > to be stopped, presumably because it wasn't running, so it seems that
> > > > something expects it to be started.
> > > >
> > > > Hosts files shouldn't be an issue as I am using DHCP and therefore
> > > > don't have any addresses there other than that of the server.
> > > >
> > > > thanks again for the input!
> > > >
> > > > Brian
> > > >
> > > > On Friday 14 December 2001 10:10 pm, you wrote:
> > > > > have you both considered turning off all the servers possible ?
> > > > > this sounds to me like a dns , routed or ypbind server running
> > > > > (that you don't need, and is not correctly configured. are you
> > > > > trying to run a local DNS server? (as oppsosed to a local cacheing
> > > > > name server) do you have ypbind running (but don't have yellow
> > > > > pages needed?). Are all the local network computers hosts file
> > > > > correct? what about the IP numbers for the DNS servers? do you have
> > > > > it set to need DNS all the time? are you running reiserFS on the
> > > > > "dedicated server, which offers some NFS exports" (not a good Idea)
> > > > > my bet is on the DNS.
> > > > > I always thought a novell server would use ipx/spx, not tcp/ip?
> > > > >
> > > > > On Thursday 13 December 2001 23:19, you wrote:
> > > > > > On Thu, 13 Dec 2001 14:40:46 +1100
> > > > > >
> > > > > > Brian Parish <[EMAIL PROTECTED]> frantically pecked out this
> > > > >
> > > > > message:::::
> > > > > > > I have a total of 4 Linux machines (OK, some of them dual boot,
> > > > > > > but let's not talk about that) on a home/office LAN. One of
> > > > > > > them is a dedicated server, which offers some NFS exports.
> > > > > > >
> > > > > > > Everything works very nicely, except that programs take forever
> > > > > > > to load the first time. Just to fire up a konsole can take 10
> > > > > > > seconds plus - this on a machine rated at 2800 bogomips with
> > > > > > > lots of memory.
> > > > > > >
> > > > > > > After things have been up for a while (don't know how long, but
> > > > > > > many minutes at least), everything is quick again.
> > > > > > >
> > > > > > > Haven't tested exhaustively, but it seems that with the LAN
> > > > > > > unplugged, none of this applies.
> > > > > >
> > > > > > This is a network issue if I've ever heard one. There is
> > > > > > something not right with the network. I have a feeling it's got
> > > > > > something to do with authentication somewhere on that LAN. Or,
> > > > > > (the last time I saw this one of the machines responsible was a
> > > > > > windows box - the novell client went south and killed the TCP/IP
> > > > > > stack.) In that case when the TCP stack became corrupt it really
> > > > > > dirtied the TCP communications on the network between that
> > > > > > machine and the servers. While it didn't affect the overall
> > > > > > performance of the network itself, it affected profoundly the
> > > > > > machine that was having the trouble.
> > > > > >
> > > > > > In that case the offending client was uninstalled, as well as the
> > > > > > TCP/IP stack which was then reinstalled, along with a newer,
> > > > > > upgraded version of the Novell client. Problem happily solved.
> > > > > >
> > > > > > I'm presently having some similar problems on my home LAN when it
> > > > > > comes to FTPing from a client machine to the FTP server here on
> > > > > > my Mandrake box. Outside my network FTP server response is very
> > > > > > quick, but locally on the LAN from time to time connecting and
> > > > > > resolving that connection in order to do any transfers can take a
> > > > > > few minutes.
> > > > > >
> > > > > > hope this helps at least shed some light.
Linux version 2.4.8-26mdk ([EMAIL PROTECTED]) (gcc version 2.96 20000731
(Mandrake Linux 8.1 2.96-0.62mdk)) #1 Sun Sep 23 17:06:39 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=305 hdd=ide-scsi devfs=mount quiet
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 1401.734 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2798.38 BogoMIPS
Memory: 512496k/524224k available (1086k kernel code, 11340k reserved, 397k data, 712k
init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383f9ff c1cbf9ff 00000000, vendor = 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: Common caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: AMD Athlon(tm) XP 1600+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb5e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PnP: PNP BIOS installation structure at 0xc00fbf80
PnP: PNP BIOS version 1.0, entry at f0000:bfb0, dseg at f0000
PnP: 14 devices detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v0.115 (20010827) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:c060
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: queued sectors max/low 340290kB/209218kB, 1024 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L040AVER07-0, ATA DISK drive
hdb: Maxtor 2B020H1, ATA DISK drive
hdc: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive
hdd: TDK CDRW241040B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=5005/255/63, UDMA(100)
hdb: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(100)
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
/dev/ide/host0/bus0/target1/lun0: p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing......done.
Freeing initrd memory: 105k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
reiserfs: checking transaction log (device 03:05) ...
Warning, log replay starting on readonly filesystem
Using r5 hash to sort names
ReiserFS version 3.6.25
Freeing unused kernel memory: 712k freed
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52809 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52809 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
Real Time Clock Driver v1.10d
clm-6005: writing inode 52808 on readonly FS
clm-6005: writing inode 52809 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
Adding Swap: 248968k swap-space (priority -1)
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6005: writing inode 52808 on readonly FS
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TDK Model: CDRW241040B Rev: 57S2
Type: CD-ROM ANSI SCSI revision: 02
reiserfs: checking transaction log (device 03:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
natsemi.c:v1.07 1/9/2001 Written by Donald Becker <[EMAIL PROTECTED]>
http://www.scyld.com/network/natsemi.html
(unofficial 2.4.x kernel port, version 1.07+LK1.0.8, Aug 07, 2001 Jeff Garzik,
Tjeerd Mulder)
PCI: Found IRQ 11 for device 00:11.0
PCI: Sharing IRQ 11 with 01:05.0
eth0: NatSemi DP83815 at 0xe49db000, 00:02:e3:21:3f:a7, IRQ 11.
eth0: Transceiver status 0x7869 advertising 05e1.
Linux version 2.4.8-26mdk ([EMAIL PROTECTED]) (gcc version 2.96 20000731
(Mandrake Linux 8.1 2.96-0.62mdk)) #1 Sun Sep 23 17:06:39 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 65536
zone(0): 4096 pages.
zone(1): 61440 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=301 devfs=mount
Initializing CPU#0
Detected 451.028 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 897.84 BogoMIPS
Memory: 254664k/262144k available (1086k kernel code, 7092k reserved, 397k data, 712k
init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 00
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: Calling quirk for 01:00
isapnp: SB audio device quirk - increasing port range
isapnp: Calling quirk for 01:02
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 PnP'
isapnp: 1 Plug & Play card detected total
PnP: PNP BIOS installation structure at 0xc00fbfd0
PnP: PNP BIOS version 1.0, entry at f0000:bff8, dseg at f0000
PnPBIOS: PNP0c02: request 0x208-0x210 ok
PnP: 15 devices detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v0.115 (20010827) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: queued sectors max/low 168960kB/56320kB, 512 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hd1: C/H/S=19710/16/255 from BIOS ignored
hda: QUANTUM FIREBALLP AS20.5, ATA DISK drive
hdb: IC35L040AVER07-0, ATA DISK drive
hdc: CD-ROM 40X/AKU, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 40132503 sectors (20548 MB) w/1902KiB Cache, CHS=39813/16/63, UDMA(33)
hdb: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(33)
hdc: ATAPI 40X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
/dev/ide/host0/bus0/target1/lun0: p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing.........done.
Freeing initrd memory: 212k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:0f.0
scsi0 : AdvanSys SCSI 3.3G: PCI Ultra: IO 0xE800-0xE80F, IRQ 0xB
Vendor: TRAXDATA Model: CDRW4260 PRO Rev: 1.0f
Type: CD-ROM ANSI SCSI revision: 02
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Freeing unused kernel memory: 712k freed
Real Time Clock Driver v1.10d
Adding Swap: 409208k swap-space (priority -1)
reiserfs: checking transaction log (device 03:08) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
ip_conntrack (2048 buckets, 16384 max)
ip_tables: (c)2000 Netfilter core team
Linux Tulip driver version 0.9.14 (February 20, 2001)
PCI: Found IRQ 10 for device 00:0d.0
eth0: Lite-On 82c168 PNIC rev 33 at 0xe400, 00:A0:CC:3E:CC:7C, IRQ 10.
eth0: MII transceiver #1 config 1000 status 782d advertising 01e1.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
