I shutdown by "right click | logoff | choose Halt" from the KDE desktop.
Problem?
The dmesg files are attached in the message that came back to me. I have
attached them again here.
Having just rebooted I see that I misquoted the message issued at startx -
it's actually something about host name unknown, but it goes by too fast to
see it properly.
Now that the server has been up all day, the client machine is super fast
right from the start. I wonder could it be a process on the server which
eventually gives up / timesout / dies which is causing these long delays?
Maybe I should set up a periodic "ps aux" command on the server to see if I
can spot a process which fits the bill.
Brian
On Tuesday 18 December 2001 9:33 pm, you wrote:
> thanks for correcting MY typo.... you were correct.
>
> > Yup - I knew about find files, but I needed the right file name - I guess
> > maybe dmesg is what you meant, not dmseg. Assuming that to be correct,
> > here are the files from both the server and a client machine.
>
> how do you shut down the computer?
>
> > dmesg in the client machine has a lot of:
> > "clm-6006: writing inode 52808 on readonly FS"
> > messages. That doesn't look healthy does it?
>
> maybe a hard drive failure in your future?
>
> > Also noticed after having switched off booting into X, that startx pauses
> > for a while then says "Host name lookup failure".
>
> ahhh.... we are looking at a dns or server problem seems to me....
>
> > Anyway dmesg files are attached.
>
> ehhh..no.
Linux version 2.4.8-26mdk ([EMAIL PROTECTED]) (gcc version 2.96 20000731
(Mandrake Linux 8.1 2.96-0.62mdk)) #1 Sun Sep 23 17:06:39 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=305 hdd=ide-scsi devfs=mount quiet
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 1401.734 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 2798.38 BogoMIPS
Memory: 512496k/524224k available (1086k kernel code, 11340k reserved, 397k data, 712k
init, 0k highmem)
Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383f9ff c1cbf9ff 00000000, vendor = 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: After generic, caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: Common caps: 0383f9ff c1cbf9ff 00000000 00000000
CPU: AMD Athlon(tm) XP 1600+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb5e0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
PnP: PNP BIOS installation structure at 0xc00fbf80
PnP: PNP BIOS version 1.0, entry at f0000:bfb0, dseg at f0000
PnP: 14 devices detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v0.115 (20010827) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:c060
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: queued sectors max/low 340290kB/209218kB, 1024 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:07.1
ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L040AVER07-0, ATA DISK drive
hdb: Maxtor 2B020H1, ATA DISK drive
hdc: LG CD-ROM CRD-8522B, ATAPI CD/DVD-ROM drive
hdd: TDK CDRW241040B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=5005/255/63, UDMA(100)
hdb: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=39703/16/63, UDMA(100)
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 >
/dev/ide/host0/bus0/target1/lun0: p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing......done.
Freeing initrd memory: 105k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
reiserfs: checking transaction log (device 03:05) ...
Warning, log replay starting on readonly filesystem
Using r5 hash to sort names
ReiserFS version 3.6.25
Freeing unused kernel memory: 712k freed
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52809 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52809 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
Real Time Clock Driver v1.10d
clm-6005: writing inode 52808 on readonly FS
clm-6005: writing inode 52809 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
Adding Swap: 248968k swap-space (priority -1)
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6006: writing inode 52808 on readonly FS
clm-6005: writing inode 52808 on readonly FS
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: TDK Model: CDRW241040B Rev: 57S2
Type: CD-ROM ANSI SCSI revision: 02
reiserfs: checking transaction log (device 03:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
natsemi.c:v1.07 1/9/2001 Written by Donald Becker <[EMAIL PROTECTED]>
http://www.scyld.com/network/natsemi.html
(unofficial 2.4.x kernel port, version 1.07+LK1.0.8, Aug 07, 2001 Jeff Garzik,
Tjeerd Mulder)
PCI: Found IRQ 11 for device 00:11.0
PCI: Sharing IRQ 11 with 01:05.0
eth0: NatSemi DP83815 at 0xe49db000, 00:02:e3:21:3f:a7, IRQ 11.
eth0: Transceiver status 0x7869 advertising 05e1.
Linux version 2.4.8-26mdk ([EMAIL PROTECTED]) (gcc version 2.96 20000731
(Mandrake Linux 8.1 2.96-0.62mdk)) #1 Sun Sep 23 17:06:39 CEST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000010000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 65536
zone(0): 4096 pages.
zone(1): 61440 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=301 devfs=mount
Initializing CPU#0
Detected 451.028 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 897.84 BogoMIPS
Memory: 254664k/262144k available (1086k kernel code, 7092k reserved, 397k data, 712k
init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
CPU: Common caps: 0183f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Mendocino) stepping 00
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: Calling quirk for 01:00
isapnp: SB audio device quirk - increasing port range
isapnp: Calling quirk for 01:02
isapnp: AWE32 quirk - adding two ports
isapnp: Card 'Creative SB AWE64 PnP'
isapnp: 1 Plug & Play card detected total
PnP: PNP BIOS installation structure at 0xc00fbfd0
PnP: PNP BIOS version 1.0, entry at f0000:bff8, dseg at f0000
PnPBIOS: PNP0c02: request 0x208-0x210 ok
PnP: 15 devices detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
devfs: v0.115 (20010827) Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x1
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
block: queued sectors max/low 168960kB/56320kB, 512 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hd1: C/H/S=19710/16/255 from BIOS ignored
hda: QUANTUM FIREBALLP AS20.5, ATA DISK drive
hdb: IC35L040AVER07-0, ATA DISK drive
hdc: CD-ROM 40X/AKU, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 40132503 sectors (20548 MB) w/1902KiB Cache, CHS=39813/16/63, UDMA(33)
hdb: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=79780/16/63, UDMA(33)
hdc: ATAPI 40X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
/dev/ide/host0/bus0/target1/lun0: p1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing.........done.
Freeing initrd memory: 212k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 11 for device 00:0f.0
scsi0 : AdvanSys SCSI 3.3G: PCI Ultra: IO 0xE800-0xE80F, IRQ 0xB
Vendor: TRAXDATA Model: CDRW4260 PRO Rev: 1.0f
Type: CD-ROM ANSI SCSI revision: 02
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
Freeing unused kernel memory: 712k freed
Real Time Clock Driver v1.10d
Adding Swap: 409208k swap-space (priority -1)
reiserfs: checking transaction log (device 03:08) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:06) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
reiserfs: checking transaction log (device 03:07) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
ip_conntrack (2048 buckets, 16384 max)
ip_tables: (c)2000 Netfilter core team
Linux Tulip driver version 0.9.14 (February 20, 2001)
PCI: Found IRQ 10 for device 00:0d.0
eth0: Lite-On 82c168 PNIC rev 33 at 0xe400, 00:A0:CC:3E:CC:7C, IRQ 10.
eth0: MII transceiver #1 config 1000 status 782d advertising 01e1.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
