Terry Smith wrote: > Short version: Got one, doesn't work :-( > > Longer version: My new linux box has returned from its original > birthplace in San Francisco (Micronux Computers) with a new mobo. The > week old machine had quit on me a couple of times finally, on Jan 6, > dropping out altogether. > > Apparently it was a problem with the mobo, specifically the voltage > supplied to the cpu and the memory. The original mobo was an Asus A7M266 > which is a socket A board, DDR, 266 FSB, etc using the AMD761 chipset. > The board had built in sound and it (the sound, not the board) worked > fine. > > Micronux replaced the mobo with an Asus A7K266 which has the same config > as the old board and a VIA 266 chipset instead of the AMD. It doesn't, > however, have onboard sound, so Micronux put in an ESS Solo 1 Audiodrive > card. > > sndconfig says "ESS Technology|ESS 1969 Solo 1 Audiodrive is not > supported" > > Mandrake Control Center, hardware configuration, detects the card and > indicates that it uses kernel module: snd-card-es1938. I selected the > Solo 1 from the ESS list and tested it. Nada! > > lspcidrake tells me basically the same thing, i.e., recognizes the card > and indicates the kernel module. > > Of course, I'm sure that there has been tons of messages about this over > the last month or two. I've managed to lose stuff from the last several > weeks on the transition including where the archives are :~ (. > > So should this card work? Is it a IRQ problem? > > TIA. > > Terry Smith > Cape Cod USA > > > > > > > ------------------------------------------------------------------------ > > Want to buy your Pack or Services from MandrakeSoft? > Go to http://www.mandrakestore.com >
chkconfig --del alsa modprobe esssolo1 Civileme
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
